View MHC-GZR8D_6965258.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? 2008 sony corporation mhc-gzr9d MHC-GZR8D mhc-gzr7d mini hi-fi component system mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-12(1) operating instructions mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-12(1) printed in china 3-870-909- 12 (1) www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb warning to reduce the risk of fre, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. do not place the naked fame sources such as lighted candles on the apparatus. to reduce the risk of fre or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects flled with liquids, such as vases, on the apparatus. as the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible ac outlet. should you notice an abnormality in the unit, disconnect the main plug from the ac outlet immediately. do not install the appliance in a confned space, such as a bookcase or built-in cabinet. do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fre or the like. fe unit is not disconnected from the mains as long as it is connected to the ac outlet, even if the unit itself has been turned of. excessive sound pressure from earphones and headphones can cause hearing loss. caution fe use of optical instruments with this product will increase eye hazard. fis appliance is classifed as a class 1 laser product. fis marking is located on the rear exterior. notice for the customer in the countries applying eu directives fe manufacturer of this product is sony corporation, 1-7-1 konan, minato-ku, tokyo, 108-0075 japan. fe authorized representative for emc and product safety is sony deutschland gmbh, hedelfnger strasse 61, 70327 stuttgart, germany. for any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. disposalfoffoldf electricalf&felectronicf equipment f (applicablefinfthef europeanfunionf andfotherfeuropeanf countriesfwithf separatefcollectionf systems) fis symbol on the product or on its packaging indicates that this product shall not be treated as household waste. instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. by ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. fe recycling of materials will help to conserve natural resources. for more detailed information about recycling of this product, please contact your local civic ofce, your household waste disposal service or the shop where you purchased the product. applicable accessories: remote commander www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb disposalfoffwastef batteriesf(applicablef infthefeuropeanfunionf andfotherfeuropeanf countriesfwithf separatefcollectionf systems) fis symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. by ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. fe recycling of the materials will help to conserve natural resources. in case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualifed service staf only. to ensure that the battery will be treated properly, hand over the product at end-of- life to the applicable collection point for the recycling of electrical and electronic equipment. for all other batteries, please view the section on how to remove the battery from the product safely. hand the battery over to the applicable collection point for the recycling of waste batteries. for more detailed information about recycling of this product or battery, please contact your local civic ofce, your household waste disposal service or the shop where you purchased the product. note on power cord plug shapes (saudi arabian model only) forfacf 0fvfwallfsockets 1 make the appropriate voltage setting on the system (only for models with a voltage selector). 2 make sure that the 13 a 3-pin plug (type bf) is securely attached to the power cord. (the 13 a 3-pin plug is attached when shipped from the factory.) forfacf1 7fvfwallfsockets 1 make the appropriate voltage setting on the system (only for models with a voltage selector). 2 remove the 13 a 3-pin plug using a screwdriver. 3 attach the supplied parallel blade plug (type a). www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb icons, such as , listed at the top of each explanation indicate what kind of media can be used with the function being explained. fe control menu items may be diferent depending on the disc. fe control menu items may vary depending on the area. fe setup menu items may be diferent depending on the area. fe order of the displayed items may be diferent from the actual display. about this manual fe instructions in this manual are for models mhc-gzr9d, MHC-GZR8D and mhc-gzr7d. each model consists of the following components. mhc-gzr9d unit: hcd-gzr9d speaker system: ss-gzr9d (front speakers) ss-rsx9d (surround speakers) ss-ctx9d (center speaker) ss-wgv9d (subwoofer) MHC-GZR8D unit: hcd-gzr8d speaker system: ss-gzr8d (front speakers) ss-rsx9d (surround speakers) ss-ctx9d (center speaker) mhc-gzr7d unit: hcd-gzr7d speaker system: ss-gzr8d (front speakers) in this manual, the mhc-gzr9d is used for illustration purposes unless stated otherwise. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb table of contents tune r listening to the radio ....................... 7 1 tap e playing a tape ...................................... 7 4 recording onto a tape .................... 7 5 usbfdevic e transferring music from a disc to an usb device ............................................ 7 8 recording analog audio to an usb device ..................................................... 8 3 listening to music of an usb device ..................................................... 8 5 soundfadjustmen t adjusting the sound ......................... 9 4 singing along: karaoke .................... 9 8 otherfoperation s using the timer ................................ 10 5 changing the display .................... 10 7 viewing information about the disc ...................................................... 10 8 hooking up optional components ...................................... 11 3 about this manual ............................... 4 playable discs ........................................ 7 guide to parts and controls ........... 1 2 gettingfstarte d hooking up the system .................... 2 0 hooking up the tv ............................. 2 6 positioning the speakers ................. 3 0 setting the clock ................................ 3 3 performing quick setup .............. 3 4 using the theatre sync function ................................................. 3 6 dis c playing a disc ....................................... 3 8 normal pla y using play mode ................................ 4 4 searching/selecting a disc .............. 4 9 playing mp3/jpeg discs ................... 5 2 enjoying divx? video fles ............... 5 7 adjusting the delay between the picture and sound ............................. 5 9 a/v sync restricting playback of the disc .... 6 0 parental contro l using the setup menu ..................... 6 3 continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb additionalfinformatio n troubleshooting .............................. 11 8 precautions ........................................ 13 3 specifcations ................................... 13 5 guide to the control menu display ................................................. 13 9 language code list ......................... 14 3 glossary .............................................. 14 5 index .................................................... 15 0 www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb playable discs type characteristics iconfusedfinf thisfmanual logo dvd video dvd video dvd-r*/-rw*/+r/+rw in dvd video format * also in video mode vr mode dvd-r/-rw in vr (video recording) mode (except for dvd-r dl) video cd video cd (ver. 1.1 and ver. 2.0) super vcd cd-r*/-rw* * in video cd or super vcd format cd audio cd cd-r*/-rw* * in audio cd format data cd cd-rom/-r/-rw in data cd format, containing mp3 audio tracks 1) , jpeg image fles 2) or divx video fles 3) , and conforming to iso 9660 4) level 1 or level 2, or joliet (expansion format) continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb type characteristics iconfusedfinf thisfmanual logo data dvd dvd-rom/-r/-rw/+r/+rw in data dvd format containing mp3 audio tracks 1) , jpeg image fles 2) or divx video fles 3) , and conforming to udf (universal disk format) fis system can also play back discs with the following disc logos: 1) mp3 (mpeg 1 audio layer 3) is a standard format defned by iso/mpeg which compresses audio data. mp3 audio tracks must be in mpeg 1 audio layer 3 format. 2) jpeg image fles must conform to the dcf image fle format (dcf design rule for camera file system: image standards for digital cameras regulated by japan electronics and information technology industries association (jeita)). 3) divx video fles must be recorded in divx format with the extension .avi or .divx. 4) a logical format of fles and folders on cd-roms, defned by iso (international organization for standardization) dvd+rw, dvd-rw, dvd+r, dvd video, and the cd logos are trademarks. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb discs that cannot be played cd-roms recorded in photo cd format data cds recorded in mp3 pro format data part of cd-extras 1) data part of mixed cds 2) super audio cds dvd audio discs dvd-rams cprm compatible dvd-r/rw recorded in copy-once programs 3) discs of non-standard shape (for example, heart, square, star) discs that have adhesive tape, paper, or sticker attached to them rental or used discs with attached seals where the glue extends beyond the seal discs that have labels printed using ink that feels tacky when touched 1) cd-extra: fis format records audio (audio cd data) on the tracks in session 1 and data on the tracks in session 2. 2) mixed cd: fis format records data on the frst track and audio (audio cd data) on the second and subsequent tracks of a session. 3) cprm: content protection for recordable media is a coding technology that protects copyright for copy-once programs. region code of dvd videos you can play back on this system your system has a region code printed on the back of the unit and will only play back dvd videos labeled with identical region code. dvd videos labeled will also be played back on this system. if you try to play back any other region code dvd video, the message playback prohibited by area limitations. will appear on the tv screen. depending on the dvd video, no region code indication may be labeled even though playing the dvd video is prohibited by area restrictions. note on dualdiscs a dualdisc is a two sided disc product which mates dvd recorded material on one side with digital audio material on the other side. however, since the audio material side does not conform to the compact disc (cd) standard, playback on this product is not guaranteed. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 10 gb notes on cd-r/-rw and dvd -r/-rw/+r/+rw in some cases, cd-rs/-rws and dvd-rs/-rws/+rs/+rws cannot be played back on this system due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring sofware. fe disc will not be played back if it has not been correctly fnalized. for more information, see the operating instructions for the recording device. note that some playback functions may not work with some dvd+rs/ +rws, even if they have been correctly fnalized. in this case, view the disc by normal playback. a disc created in packet write format cannot be played back. note on playback operations of dvd videos and video cds some playback operations of dvd videos and video cds may be intentionally set by sofware producers. since this system play back dvd videos and video cds according to the disc contents the sofware producers designed, some playback features may not be available. also, refer to the instructions supplied with the dvd videos or video cds. music discs encoded with copyright protection technologies fis product is designed to play back discs that conform to the compact disc (cd) standard. recently, various music discs encoded with copyright protection technologies are marketed by some record companies. please be aware that among those discs, there are some that do not conform to the cd standard and may not be playable by this product. notes on multi session disc if the frst session is recorded in audio cd or video cd format, only the frst session will be played back. fe system will recognize a multi session disc as an audio cd if there is a session recorded in audio cd format on the disc. however, the system will only play back the disc if the frst session is recorded in audio cd format. fis system can play back multi session discs when an mp3 audio track, a jpeg image fle or a divx video fle is contained in the frst session. any subsequent mp3 audio tracks, jpeg image fles or divx video fles recorded in later sessions can also be played back. with data cd or data dvd, the system will only play back divx video fles even if it contains mp3 audio tracks or jpeg image fles. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 11 gb copyrights fis product incorporates copyright protection technology that is protected by u.s. patents and other intellectual property rights. use of this copyright protection technology must be authorized by macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by macrovision. reverse engineering or disassembly is prohibited. fis system incorporates dolby 1) digital, dolby pro logic (ii) adaptive matrix surround decoder, and dts 2) digital surround system. 1) mhc-gzr9d/gzr8d: manufactured under license from dolby laboratories. dolby, pro logic, and the double-d symbol are trademarks of dolby laboratories. mhc-gzr7d: manufactured under license from dolby laboratories. dolby and the double- d symbol are trademarks of dolby laboratories. 2) mhc-gzr9d/gzr8d: manufactured under license under u.s. patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other u.s. and worldwide patents issued & pending. dts and dts digital surround are registered trademarks and the dts logos and symbol are trademarks of dts, inc. ?1996-2007 dts, inc. all rights reserved. mhc-gzr7d: manufactured under license under u.s. patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other u.s. and worldwide patents issued & pending. dts and dts 2.0 + digital out are registered trademarks and the dts logos and symbol are trademarks of dts, inc. ?1996-2007 dts, inc. all rights reserved. divx? is a video fle compression technology, developed by divx, inc. divx, divx certifed, and associated logos are trademarks of divx, inc. and are used under license. mpeg layer-3 audio coding technology and patents licensed from fraunhofer iis and fomson. windows media is a registered trademark of microsof corporation in the united states and/or other countries. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb guide to parts and controls fis manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names. unit www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb guide to parts and controls remote continued (on/standby) (24, 79, 106, 129) press to turn on or of the system. unit: standby indicator (118) lights up when the system is turned of. remote: tv 1) (on/standby) (29) press to turn on or of the tv. display (27, 33, 73, 107, 108) press to display the disc information or clock in the front panel display. unit: illumination (108, 129) press to change the illumination pattern around master volume . display disc tray remote sensor www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb enter (28, 33, 34, 39, 44, 49, 53, 58, 59, 60, 63, 71, 74, 76, 79, 83, 87, 95, 102, 105, 129) press to enter the settings. sound field (95) press to select the sound feld for the surround sound. unit: groove (94) press to reinforce the bass. unit: preset eq (94) press to select the sound efect. unit: eq band/memory (95) press to select the frequency band when adjusting the equalizer. rec to usb (79, 83) press to transfer music from a disc or record the sound from an analog audio source to the connected optional usb device. press to mark track numbers during recording. rec to tape (76) press to record on a tape. options (74, 75, 107, 116) press to enter the option menus. unit: open/close (38) press to load or eject a disc. unit: disc skip/ex-change (38, 40) press to select a disc. press to exchange a disc while playing. remote: disc skip (40, 79) press to select a disc. unit: disc 1 disc 3 (40, 76, 79) press to select a disc. press to switch to the dvd function from other function. push/push (74) press to insert or eject a tape. unit: ? (play) (26, 38, 74, 87) remote: 2) (play) (38, 74, 87) press to start playback. (pause) (27, 39, 75) press to pause playback. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb guide to parts and controls continued (stop) (39, 72, 75, 79) press to stop playback. / (rewind/fast forward) (39, 75) press to fnd a point in a track, chapter or video fle. unit: / (39) remote: slow/ slow (39) press to watch the slow - motion play. tuning +/ (71, 72, 73) press to tune in the desired station. remote: +/ (36, 39) press to select a folder. unit: operation dial (39, 72, 74, 76, 95, 107) turn to select a track, chapter or video fle. turn to select the preset station. remote: preset +/ (72) press to select the preset station. remote: / (go backward/forward) (35, 37, 39, 74, 88) press to select a track, chapter or video fle. remote: tv ch +/ 1) (29) press to change the tv channels. mic 1/mic 2 jacks (77, 98) connect a microphone. mic 1 level/mic 2 level (98) turn to adjust the microphone volume. echo level (99) turn to adjust the echo level. phones jack connect the headphones. unit: master volume (38, 99, 105, 108) turn to adjust the volume. remote: volume +/ 2) (38, 99, 105) press to adjust the volume. remote: tv vol +/ 1)2) (29) press to adjust the tv volume. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb unit: dvd (26, 27, 34, 38, 76, 79, 98) press to select the dvd function. unit: usb (76, 81, 85, 98) press to select the usb function. unit: tape a/b (74, 75) press to select the tape function. press to select tape a or tape b. unit: tuner/band (71, 72) press to select the tuner function. press to switch among fm and am band. unit: dmport (116) press to select the dmport function. unit: video/sat (116) press to select the video or sat function. remote: function +/ (27, 34, 38, 71, 74, 79, 83, 85, 98, 116) press to select the function. (usb) port (78, 83, 85) connect an optional usb device. (usb) indicator lights up in red when transferring or recording to the connected optional usb device or when erasing audio tracks or folders. (mhc-gzr9d only) subwoofer (30) press to turn on or of the subwoofer. subwoofer indicator (30) lights up when the subwoofer is turned on. picture navi (54, 89) press to display the thumbnail pictures. repeat/fm mode (48, 73, 93) press to listen to a disc, an usb device, a single track or fle repeatedly. press to select fm reception mode (monaural or stereo). audio (41, 99, 112) press to display the current audio signal on the tv screen. subtitle (40) press to switch the language of the subtitle (dvd video only). d. tuning (72) press to switch to the direct tuning mode. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 17 gb guide to parts and controls angle (40) press to change the angle (dvd video with multi-angles only). dvd/tuner menu (49, 52, 58, 71, 87) press to display the menu items on the tv screen. press to preset the radio station. display (28, 35, 44, 49, 55, 59, 60, 63, 80, 87, 102, 112, 139) press to display the control menu on the tv screen. fe control menu is displayed only when the dvd function or usb function is selected. tv 1) (29) press to operate the tv functions. step (39) press to play one frame at a time when playback is paused. advance (39, 53, 58, 87) press to advance the current scene during playback. replay (39, 53, 58, 87) press to replay the previous scene during playback. continued return (43, 53, 59, 81, 88) press to return to the previous menu on the tv screen. / / / (28, 29, 44, 45, 49, 71, 80, 96, 105) press to select the menu items. dvd top menu (49) press to display the dvd title on the tv screen. clear (34, 36, 45, 51, 54, 70, 81, 89) press to delete a pre-programmed track or fle. press to erase audio tracks or folders from the connected optional usb device. -/-- 1) (29) press to enter a single digit or double digit number. numeric buttons 2) (29, 39, 49, 60, 65, 72) press to select a track, chapter or video fle. press to enter a password. 10/0 1) press to enter a double digit number. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 18 gb key control ? (101) press to change the key to suit your vocal range. score (103) press to start or stop calculating your vocal score. karaoke mode (99) press to select the karaoke mode. karaoke pon (101) press to activate the karaoke pon function. time/text (108, 110) press to change the information appearing in the front panel display or on-screen display. sleep (36, 105) press to set the sleep timer. tv input 1) (29) press to switch the input sources. timer menu (33, 105) press to set the clock and the timers. theatre sync (36) press to activate the theatre sync function. 1) fis button is used to operate a sony tv. for details, see operating a sony tv (page 29). 2) fe numeric button 5 , tv vol + , volume + and buttons on the remote have a tactile dot. use the tactile dot as a reference when operating the system. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 19 gb guide to parts and controls display lights up when the output video signal is ntsc. (27) indicates the current surround format. lights up when disc number is displayed. lights up when the id3 tag information is displayed. lights up when the title or chapter number is displayed. lights up when the track information is displayed. lights up when playing video cd with pbc function. (42) lights up in tuner function. (71) lights up when the usb device is recognized. (85) lights up when the karaoke mode is turned on. (98) lights up during transfer or recording. (75, 78, 83) indicates the tape playback direction. (74) displays the text information. indicates the selected play mode. (44) indicates the disc presence. (38) lights up when groove or z- groove is turned on. (94) indicates the fle format. indicates the playback status of the disc or usb device. lights up when the timer is set. (105) lights up when the usb function is selected. (85) indicates the type of disc being played back. (38) lights up when progressive (component out) is set to on. (28) www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 0 gb gettingfstarted hooking up the system mhc-gzr9d am loop antenna fm lead antenna (extend it horizontally.) surround speaker (right) front speaker (right) subwoofer center speaker front speaker (left) surround speaker (left) wall socket www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb getting started MHC-GZR8D am loop antenna fm lead antenna (extend it horizontally.) surround speaker (right) front speaker (right) center speaker front speaker (left) surround speaker (left) wall socket continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb mhc-gzr7d am loop antenna fm lead antenna (extend it horizontally.) front speaker (right) front speaker (left) wall socket www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb getting started fm/am antennas find a location and an orientation that provide good reception, and then set up the antenna. keep the antennas away from the speaker cords, the power cord and the usb cable to avoid picking up noise. speakers insert only the stripped portion of the speaker cords. fe speaker cords are color-coded with their respective speaker terminals. fe type of speakers supplied varies according to the model you purchased (see about this manual (page 4)). frontfspeakers ? + insert only the stripped portion of the speaker cords black ( surroundfspeakers f (mhc-gzr9d/gzr8dfonly) green + insert only the stripped portion of the speaker cords gray/striped ( centerfspeaker f (mhc-gzr9d/gzr8dfonly) insertfonlyfthefstrippedf portionfoffthefspeakerfcords gray/stripedf( www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb terminalsfonfthefcenterfandfsurroundf speakersf(mhc-gzr9d/gzr8dfonly) connect the speaker cords to the terminals on the center and surround speakers as shown below. insert only the stripped portion of the speaker cords black ( ) gray ( ) gray/ striped ( ) gray/ solid ( ) subwoofer f (mhc-gzr9dfonly) black ( ) blue ( ) ? + notes be sure to connect the speakers securely and correctly. be sure to match the speaker cord to the appropriate terminal on the components: to and to . if the cords are reversed, the sound will be distorted and will lack bass. voltage selector for models with a voltage selector, set voltage selector to the local power line voltage. * saudi arabian model: 120 127 v power connect the power cord to a wall socket. fe demonstration appears in the display. when you press , the system turns on and the demonstration automatically ends. if the supplied adapter on the plug does not ft your wall socket, detach it from the plug (only for models equipped with an adapter). www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb getting started inserting two r6 (size aa) batteries into the remote slide and remove the battery compartment lid, and insert the two supplied r6 (size aa) batteries, side frst, matching the polarities shown below. note if you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. tip with normal use, the batteries should last for about six months. when the remote no longer operates the system, replace both batteries with new ones. attaching the speaker pads attach the supplied speaker pads at each corner on the bottom of the speakers to prevent them from slipping. frontfspeakersf(leftf( )/rightf())/ subwooferf( ) 1) centerfspeakerf( ) ) /surroundf speakersf(leftf( )/rightf()) ) 1) mhc-gzr9d only 2) mhc-gzr9d/gzr8d only continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb when carrying this system perform the following procedure to protect the dvd mechanism. use buttons on the unit for the operation. 1 press / to turn on the system, then press dvd . 2 make sure that no disc is loaded in the system and check that dvd no disc appears. 3 hold down ? and then press / until standby appears in the display. then, lock appears in the display. 4 unplug the power cord. hooking up the tv connect the video input jack of your tv to the video out jack with the supplied video cord. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb getting started when connecting a video deck connect the video deck to the tv using a video cord (not supplied). however, do not connect this unit to the tv through the video deck. otherwise, you may experience video leakage when watching video images from this system. connect this unit directly to the tv as shown below. tv unit video deck do not connect directly tip for higher quality video images: use the optional component video cords to connect the component video input jacks on your tv to the component video out jacks of this unit. if your tv is compatible with progressive format signals, use this connection and set progressive (component out) to on (page 28). you can use an optional s video cord to connect the s video input jack on your tv to the s video out jack of this unit. changing the color system (except for russian and latin american models) set the color system to pal or ntsc depending on the color system of your tv. fe default setting for color system is diferent depending on the area. each time you perform the procedure below, the color system changes as follows: ntsc pal 1 press / to turn on the system. 2 press function +/ repeatedly to select dvd (or press dvd on the unit). 3 press / to turn of the system. 4 press display repeatedly until sony demo appears in the display. 5 press / on the unit while holding down on the unit. fe system turns on automatically and the color system is changed. color ntsc or color pal appears in the display. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb changing the format of the video signal output from component video out jacks progressive is a method for displaying tv images that reduces fickering and sharpens the image. to use this method, you need to connect to a tv that can accept progressive signals. you can output video signals from component video out jacks in interlace or progressive format. 1 press function +/ repeatedly to select dvd (or press dvd on the unit). 2 press display when playback is stopped. fe control menu appears on the tv screen. 3 press or repeatedly to select (setup), then press enter . fe options for setup appear. 4 press or repeatedly to select custom, then press enter . fe setup menu appears. 5 press or repeatedly to select video setup, then press enter . fe options for video setup appear. 6 press or repeatedly to select progressive (component out), then press enter . fe options for progressive (component out) appear. 7 press or repeatedly to select the desired setting, then press enter . fe default setting is underlined. ? off : outputs interlace signals. select this setting when: your tv does not accept progressive signals. your tv is connected to jacks other than the component video out jacks. ? on: outputs progressive signals. select this setting when: your tv accepts progressive signals. your tv is connected to the component video out jacks. when you select on, the confrmation display appears. follow the steps below. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb getting started 8 press or repeatedly to select start, then press enter . fe system outputs the progressive signal for 5 seconds. check that the screen is displayed correctly. 9 press or repeatedly to select yes. fe system outputs the progressive signal. when you select no, the system does not output the progressive signal. note fere would be no image on your tv or the image is not clear if your setting does not match your tv or connection. when using a tv turn on the tv and select the video input so that you can view the pictures from this system. operating a sony tv you can use the following buttons to operate a sony tv. fese buttons have been marked in orange. to press turn the tv on or of tv / while holding down tv switch the tvs input source between the tv and other input sources tv input while holding down tv select the tv channels tv ch +/ or numeric buttons * while holding down tv adjust the volume of the tv speaker(s) tv vol +/ while holding down tv * for double digit number, hold down tv and press -/-- , then press the number. (for example, hold down tv , press -/-- , then 2 and 5 for entering 25.) www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 0 gb positioning the speakers 1 place the front speakers at an angle of 45 degrees from your listening position. 2 (mhc-gzr9d/gzr8d only) place the center speaker at about the same height as the front speakers. align the center speaker with the front speakers or place it slightly behind the front speakers. 3 (mhc-gzr9d/gzr8d only) place the surround speakers. position the surround speakers within the respective gray ranges. positioning both surround speakers the same distance from the listening position is efective. 4 (mhc-gzr9d only) place the subwoofer, then press subwoofer on the unit. fe subwoofer indicator on the unit lights up. to obtain a better bass reproduction, we recommend you to place the subwoofer on a solid foor where resonance is unlikely to occur. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb getting started notes do not place the surround speakers on top of a tv. 1) fis may cause distortion of the colors in the tv screen. be sure to connect the both lef and right surround speakers. 1) otherwise, the sound will not be heard. always place the subwoofer vertically, keeping it a few centimeters away from the wall. 2) 3) if the subwoofer is placed in the center of a room, the bass could be extremely weakened. 2) 3) fis is due to the infuence of the standing wave of the room. if this happens, move the subwoofer away from the center of the room or eliminate the cause of the standing wave, by placing a bookshelf against the wall, etc. 1) mhc-gzr9d/gzr8d only 2) mhc-gzr9d only 3) for MHC-GZR8D/gzr7d, the subwoofer is an option (sold separately). refer to the subwoofer operating instructions for the detailed setting method. to install the surround speakers on the wall (mhc-gzr9d/gzr8d only) 1 prepare screws (not supplied) that are suitable for the hole on the back of each speaker. see the illustrations below. 9 mm more than 25 mm 5.3 mm 4 mm hole on the back of the speaker 2 fasten the screws to the wall. fe screws should protrude 5.5 to 7 mm. 5.5 to 7 mm continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb 3 hang the speakers on the screws. 5.3 mm 9 mm hole on the back of the speaker notes use screws that are suitable for the wall material and strength. as a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. install the surround speakers on a vertical and fat wall where reinforcement is applied. contact a screw shop or installer regarding the wall material or screws to be used. sony is not responsible for accident or damage caused by improper installation, insufcient wall strength or improper screw installation, natural calamity, etc. speaker settings to enjoy dvd videos and other discs with multichannel sound and dolby surround efects, the speakers need to be adjusted. set the distance from the listening position to the speakers, and the balance and level. fen use the test tone to adjust the volume of each speaker to the same level. for details, see setting the speakers (page 68). www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb getting started setting the clock use buttons on the remote to set the clock. 1 press / to turn on the system. 2 press timer menu . fe hour indication fashes in the display. if play set fashes in the display, press or repeatedly to select clock set, then press enter . 3 press or repeatedly to set the hour. 4 press enter . fe minute indication fashes in the display. 5 press or repeatedly to set the minutes. 6 press enter . fe clock starts functioning. note fe clock settings are canceled when you disconnect the power cord or if a power failure occurs. to display the clock when the system is of press display repeatedly until the clock is displayed. fe clock is displayed for about 8 seconds. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb performing quick setup before using the system, you can make the minimum basic adjustments in quick setup. if you do not want to perform quick setup, press clear in step 3. fe guide message will disappear from the tv screen. 1 turn on your tv and select the video input. 2 press / to turn on the system. notes make sure there is no disc in the unit. otherwise, the guide message does not appear. make sure that the headphone or microphone is not connected. otherwise, you cannot perform speaker setup. 3 press function +/ repeatedly to select dvd (or press dvd on the unit). fe guide message appears at the bottom of the tv screen. 4 press enter without loading a disc. language setup appears on the tv screen. 5 press or repeatedly to select a language, then press enter . fe setting is selected and video setup appears on the tv screen. tips fe selected language is for osd, menu and subtitle . fe selectable language is diferent depending on the area. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb getting started 6 press or repeatedly to select the setting that matches your tv type. iffyoufhavefaf : fstandardftv: select 4:3 letter box or 4:3 pan scan (page 65, 66) iffyoufhavefafwide-screenftvforfaf : fstandardftvfwithfwide-screenf mode: select 16:9 (page 65) 7 press enter . mhc-gzr9d/gzr8d: fe setting is selected and the speaker setup display appears on the tv screen. go to step 8. mhc-gzr7d: fe setting is selected and quick setup is complete. appears on the tv screen. fe system is ready for playback. if you want to change each setting individually, see using the setup menu (page 63). 8 press or repeatedly to select the front speaker distance from your listening position, then press enter . repeat this step to adjust the center and surround speaker distance. fe setting is selected and quick setup is complete. appears on the tv screen. fe system is ready for playback. to perform further speaker settings, see setting the speakers (page 68). if you want to change each setting individually, see using the setup menu (page 63). if you make a mistake press , then select the item again. to quit quick setup press display . continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb to recall quick setup settings 1 press display when playback is stopped. fe control menu appears on the tv screen. 2 press or repeatedly to select (setup), then press enter . 3 press or repeatedly to select quick, then press enter . note fe guide message appears at the bottom of the tv screen when you turn on the system for the frst time or afer performing reset (page 130). using the theatre sync function theatre sync allows you to turn on your sony tv and this system, changes the systems function to dvd and then switches the tvs input source you have set with just one button. preparing to use the theatre sync function register the tvs input source connected to this system. to select the tvs input press the following buttons while holding down sleep . press tvsfinputfsource 0 no input source (default) 1 to 8 video 1 to video 8 9 component 1 clear component 2 component 3 + component 4 fe selected tvs input source is memorized into the remote. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb getting started operating the theatre sync function keep the remote pointed in the direction of the tv until the tv is turned on and the input source is changed correctly, then press theatre sync . if this function does not work, change the transmission time. fe transmission time varies depending on the tv. to change the transmission time press the following buttons while holding down . press transmissionftime 1 0.5 (default) 2 1 3 1.5 4 2 5 2.5 6 3 7 3.5 8 4 note fis function is only for sony tv series, however, some tv products may also not work. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb disc playing a disc normal play depending on the dvd video or video cd, some operations may be diferent or restricted. refer to the operating instructions supplied with the disc. notefonfthefmaximumfnumberfoff tracks,fflesfandffoldersfonfafdataf cd/dvd fis system cannot play a data cd/ dvd in the following cases. C when the number of tracks or fles on a folder exceeds 150. C when the number of folders on a disc exceeds 200. fese numbers may vary depending on the track structure, the fle structure and the folder structure. example:fwhenfplayingfafdvdfvideo disc playing indicator elapsed playing time 1 press function +/ repeatedly to select dvd (or press dvd on the unit). 2 press open/close on the unit. 3 load a disc with the label side facing up on the disc tray . to load additional discs, press disc skip/ex-change on the unit to rotate the disc tray . when you play back an 8 cm disc such as a cd single, place it on the inner circle of the tray 4 press open/close on the unit to close the disc tray . do not forcibly push the disc tray to close it as this may cause a malfunction. if the playback does not start automatically, press (or ? on the unit) . 5 press volume +/ (or turn master volume on the unit) to adjust the volume. note depending on the system status, the volume level may not appear on the tv screen. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb disc other operations to dofthis stop playback press . pause playback press 1) . press again or press (or ? on the unit) to resume playback. select a track, chapter or video fle 2) press or repeatedly (or turn operation dial on the unit clockwise or counterclockwise) during playback. or, press the numeric buttons when the control menu is turned of, then press enter 3) . select a folder 4) press +/ repeatedly during playback or when playback is paused. locate a point quickly in fast forward or fast reverse (lock search) 5) press or during playback. each time you press or , the playback speed changes cyclically 6) . to return to normal playback, press (or ? on the unit) . to dofthis watch frame by frame (slow- motion play) 7) press slow or slow when playback is paused. each time you press slow 8) or slow , the playback speed changes. to return to normal playback, press (or ? on the unit) . play one frame at a time (freeze frame) 7) press step to go to the next frame when playback is paused. press step 8) to go to the preceding frame when playback is paused. to return to normal playback, press (or ? on the unit) . replay the previous scene press replay during playback. (instant replay) 9) briefy fast forward the current scene press advance during playback. (instant advance) 9) continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 0 gb to dofthis select a disc press disc skip on the remote (or one of disc 1 disc 3 on the unit). switch to dvd function from another source press one of disc 1 disc 3 on the unit (automatic source selection). exchange other discs while playing press disc skip/ex- change on the unit. 1) fere may be some disturbance in the video image. 2) except for jpeg image fles. you cannot select an audio track during lock search operation of mp3 audio tracks. 3) dvd video, dvd-r/-rw in vr mode, video cd, audio cd and divx video fle only. 4) mp3 audio tracks, jpeg image fles and divx video fles only. 5) except for jpeg image fles. 6) depending on the disc, the actual speed may difer. 7) dvd video, dvd-r/-rw in vr mode, divx video fles and video cd only. 8) except for video cd and divx video fle. 9) dvd video and dvd-r/-rw in vr mode only. notes you cannot search for a still picture on a dvd-r/-rw in vr mode. you may not be able to use the instant replay or instant advance function in repeat play mode or with some scenes. displaying multi-angles and subtitles changing the angles (dvd video only) you can change the viewing angle while playing a dvd video on which various angles (multi-angles) for a scene are recorded. press angle repeatedly during playback. each time you press angle , the angle changes. note depending on the dvd video, you may not be able to change the angle, even if multi-angles are recorded on the dvd video. displaying the subtitles (dvd video, dvd-r/-rw in vr mode and divx video fles only) you can turn the subtitles on or of while playing a dvd video, dvd-r/ - rw in vr mode or divx video fles on which subtitles are recorded. you can also change the language of the subtitles with dvd video, dvd-r/-rw in vr mode or divx video fles on which multilingual subtitles are recorded. press subtitle repeatedly during playback. each time you press subtitle , the subtitle language changes or turns of. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb disc continued notes depending on the dvd video, you may not be able to change the subtitles even if multilingual subtitles are recorded on the dvd video. you also may not be able to turn the subtitles of. you can change the subtitles if the divx video fle has an .avi or .divx extension and contains subtitle information within the same fle. other useful functions changing the sound when playing a dvd video or a divx video fle recorded in multiple audio formats, you can select the audio format you want. if the dvd video is recorded with multilingual tracks, you can also change the language. when playing a video cd, audio cd or mp3 audio tracks, you can select the sound from the right or lef channel and listen to the sound of the selected channel through both the right and lef speakers. for example, when playing a track with the vocals on the right channel and the instruments on the lef channel, you can hear the instruments from both speakers by selecting the lef channel. press audio repeatedly during playback to select the audio signal you want. fe default setting is underlined. whenfplayingfafdvdfvideo: depending on the dvd video, the option of language and audio format varies. when a 4-digit number is displayed, the digits represent a language code (see language code list (page 143)). when the same language is displayed two or more times, the dvd video is recorded in multiple audio formats. note that the sound changes automatically depending on the disc. whenfplayingfafdvd-r/-rwfinfvrf mode: fe number of audio tracks recorded on a disc are displayed. example: 1: main : the main sound of the audio track 1. 1: sub: the sub sound of the audio track 1. 1: main+sub: the main and sub sound of the audio track 1. 2: main*: the main sound of the audio track 2. 2: sub*: the sub sound of the audio track 2. 2: main+sub*: the main and sub sound of the audio track 2. * fese items do not appear if only one audio stream is recorded on the disc being played back. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb whenfplayingfafdivxfvideoffle: fe options for audio format difer depending on the divx video fles. whenfplayingfafvideofcd,faudiofcd,f orfmp faudioftrack: stereo : the standard stereo sound. 1/l: the sound of the lef channel (monaural). 2/r: the sound of the right channel (monaural). whenfplayingfafsuperfvcd: 1: stereo : the stereo sound of the audio track 1. 1: 1/l: the sound of the lef channel of the audio track 1 (monaural). 1: 2/r: the sound of the right channel of the audio track 1 (monaural). 2: stereo: the stereo sound of the audio track 2. 2: 1/l: the sound of the lef channel of the audio track 2 (monaural). 2: 2/r: the sound of the right channel of the audio track 2 (monaural). note while the system is playing a super vcd on which the audio track 2 is not recorded, no sound will come out when you select 2: stereo, 2: 1/l or 2: 2/r. playing video cds with pbc functions (version 2.0) pbc playback (video cd only) you can use the pbc (playback control) menus on your tv screen to enjoy the discs interactive sofware. fe menu format and structure may difer depending on each disc. 1 press (or ? on the unit) to start playing a video cd with pbc functions (version 2.0). fe pbc menu appears on the tv screen. depending on the video cd, the menu may not appear. 2 press the numeric buttons to select the item number you want. 3 press enter . depending on the video cd, press enter may appear as press select in the operating instructions supplied with the disc. in this case, press (or ? on the unit) . 4 continue playback according to the instructions on the menus. refer to the operating instructions supplied with the video cd, as the operating procedure may difer depending on the video cd. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb disc continued tofreturnftofthefpreviousfmenu press return . note pbc playback is canceled when shufe play, program play or repeat play is activated. tofcancelfplaybackfwithfpbcf functions 1 press or repeatedly or press the numeric buttons to select a track when playback is stopped. 2 press (or ? on the unit) or enter . playback starts from the selected track. still images, such as the menu screens, will not be shown. to return to pbc playback, press twice, then press (or ? on the unit) . resuming playback from the point you stopped the disc resume play fis system memorizes the point where you stopped the disc so you can resume playback from that point. resume play is not canceled when you turn of the system except for mp3 audio tracks, jpeg image fles and divx video fles. 1 while playing a disc, press to stop playback. resume appears in the display. if resume does not appear, resume play is not available. 2 press (or ? on the unit) . fe system starts playback from the point you stopped the disc in step 1. notes you cannot perform resume play during shufe play or program play. fis function may not work properly with some discs. resume play is canceled when you press when playback is stopped. you open the disc tray. you change the function. you change the settings in the setup menu. you changed the parental control level. tip to play back from the beginning of the disc, press twice, then press (or ? on the unit) . www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb resuming playback of a disc that was stopped multi-disc resume (dvd video and video cd only) fis system can store the point where you stopped the playback of the disc for up to 10 discs and resumes playback when you insert the same disc again. if you store a playback resume point for the 11th disc, the playback resume point for the frst disc will be deleted. to activate this function, set multi- disc resume in system setup to on (page 68). notes if multi-disc resume in system setup is set to on and you play back a recorded disc such as dvd-r, the system may play back other recorded discs from the same playback resume point. to start playback from the beginning of the disc, press twice and then press (or ? on the unit) . fe playback resume point is deleted when the power cord is disconnected. using play mode creating your own program program play you can make a program of up to 99 steps in the order you want them to be played back. you can only program the tracks from the current disc. 1 press display when playback is stopped. fe control menu appears on the tv screen. 2 press or repeatedly to select (program), then press enter . fe options for program appear on the tv screen. 3 press or repeatedly to select set , then press enter . track number www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb disc 4 press . fe cursor moves to the track list t (in this case, 01). 5 select the track you want to program. for example, select track 02. press or repeatedly to select 02 under t, then press enter . selected track total time of the programmed tracks 6 to program other tracks, repeat steps 4 to 5. 7 press (or ? on the unit) . program play starts. when the program play ends, you can restart the same program by pressing (or ? on the unit) . tofchangefafprogrammedfstep: press or repeatedly to select the programmed step number you want to change. fen, press and select the desired track number. tofdeletefafprogrammedfstep: press or repeatedly to select the programmed step number you want to delete. fen, press clear . tofdeletefallfoffthefprogrammedf stepsfinfthefprogramflist: press to select all clear. fen, press enter . to cancel program play press clear or select off in step 3. to play back the same program again, select on in step 3 and press enter . continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb to turn of the control menu press display repeatedly until the control menu disappears from the tv screen. notes when program play is activated, the repeat setting is automatically changed to on if the current setting is all discs, one disc or track. you cannot perform program play with video cds during pbc playback. tip fe program play is canceled and the program list is cleared when you open the disc tray. you change the disc. you turn of the system. you change the function. playing in random order shufe play you can play back the tracks on the current disc in random order. each time you perform shufe play, the playing order may difer. shufe play is only available for the tracks on the current disc. 1 press display . fe control menu appears on the tv screen. 2 press or repeatedly to select (shuffle), then press enter . fe options for shuffle appear on the tv screen. 3 press or repeatedly to select the setting you want. whenfplayingfafvideofcdforf audiofcd: track: all tracks on the current disc is played back randomly. whenfprogramfplayfisfactivated: on: all tracks in the program list is played back randomly. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb disc continued whenfplayingfafdatafcd/dvdf (exceptfforfdivxfvideoffles): on (music): all mp3 audio tracks in the selected folder on the current disc are played back randomly. when no folder is selected, the frst folder is played back randomly. 4 press enter . 5 press (or ? on the unit) . shufe play starts. to cancel shufe play, press clear or select off in step 3. to turn of the control menu press display repeatedly until the control menu disappears from the tv screen. notes shufe play is canceled when you open the disc tray. you change the disc. you turn of the system. you change the function. you perform track/index search. you set mode (music, image) to image when playback is stopped. you perform cd synchro recording. you transfer music from a disc to an usb device. you cannot perform shufe play with video cds during pbc playback. fe same song may be played back repeatedly for mp3 audio tracks. playing repeatedly repeat play you can play the contents on a disc repeatedly. you can select shufe play and program play at the same time. 1 press display . fe control menu appears on the tv screen. 2 press or repeatedly to select (repeat), then press enter . fe options for repeat appear on the tv screen. 3 press or repeatedly to select the setting you want. fe default setting is underlined. whenfplayingfafdvdfvideoforf dvd-r/dvd-rwfinfvrfmode: off : does not play back repeatedly. all discs: repeats all discs. one disc: repeats all the titles on the current disc. title: repeats the current title. chapter: repeats the current chapter. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb whenfplayingfafvideofcdforf audiofcd: off : does not play back repeatedly. all discs: repeats all discs. one disc: repeats all the tracks on the current disc. track: repeats the current track. whenfplayingfafdatafcdforfdataf dvd: off : does not play back repeatedly. all discs: repeats all discs. one disc: repeats all the folders on the current disc. folder: repeats the current folder. track 1) : repeats the current track. file 2) : repeats the current fle. 1) mp3 audio tracks only. 2) divx video fles only. whenfprogramfplayforfshufef playfisfactivated: off : does not play back repeatedly. on: repeats the program play or shufe play. 4 press enter . 5 press (or ? on the unit) . repeat play starts. to cancel repeat play, press clear or select off in step 3. to turn of the control menu press display repeatedly until the control menu disappears from the tv screen. notes you can also change the repeat play setting by pressing repeat/fm mode repeatedly. rep lights up in the display when repeat play is set to all discs, one disc, folder or on. rep1 lights up in the display when repeat play is set to title, chapter, track or file. depending on the dvd video, you cannot perform repeat play. you cannot perform repeat play with video cds during pbc playback. when playing a data cd/dvd which contains mp3 audio tracks and jpeg image fles, the audio sound will not match the image if their playing time are diferent. you cannot select track when mode (music, image) is set to image (page 55). repeat play is canceled when you open the disc tray. you change the disc (except when all discs is selected). you turn of the system. you change the function (except when all discs is selected). you perform cd synchro recording. you transfer music from a disc to an usb device. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb disc continued searching/selecting a disc playing dvd videos using the menu some dvd videos have menus to help you enjoy the dvd videos. you can play back dvd videos using these menus on the tv screen. using dvd top menu a dvd video contains a lot of sections of picture or music feature called title. when you play back a dvd video which contains several titles, you can select the title you want using dvd top menu . using dvd menu some dvd videos allow you to select the disc contents using a menu. when you play back these dvd videos, you can select items such as the language for the subtitles and the language for the sound using dvd/tuner menu . 1 press dvd top menu or dvd/tuner menu . fe menu appears on the tv screen. fe contents of the menu vary depending on the disc. 2 press / / / or the numeric buttons to select the title or item you want to play back. 3 press enter . selecting original or play list on a dvd-r/-rw in vr mode fis function is only available for dvd- rs/-rws in vr mode with a playlist created. 1 press display when playback is stopped. fe control menu appears on the tv screen. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 0 gb 2 press or repeatedly to select (original/play list), then press enter . fe options for original/play list appear on the tv screen. 3 press or repeatedly to select the setting you want. play list: play back according to the playlist created on the disc. original: play back according to the originally recorded sequence. 4 press enter . using the on-screen display to search for a title/chapter/ scene/track/index/folder/fle you can search by diferent information recorded on a disc, such as title, track, and folder. each item is assigned a unique number on the disc, and you can select the numbered item you want from the control menu. you can also search for a particular point using the time code (time search) (dvd video and dvd- r/-rw in vr mode only). 1 press display . when playing a data cd/dvd with jpeg image fles, press display twice. fe control menu appears on the tv screen. 2 press or repeatedly to select the search item. example: when you select (chapter) ** (**) is selected (** refers to a number). fe number in parentheses indicates the total number of titles, chapters, tracks, indexes, scenes, folders or fles. selected row 3 press enter . ** (**) change to C C (**). www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb disc to search for a particular point using the time code time search (dvd video and dvd-r/-rw in vr mode only) 1 press display . 2 press or repeatedly to select (time). t **:**:** (elapsed playing time of the current title) is selected. 3 press enter . t **:**:** changes to t--:--:--. 4 input the time code using the numeric buttons , then press enter . for example, to fnd the scene at 2 hours, 10 minutes, and 20 seconds afer the beginning, enter 21020. if you make a mistake, press clear to cancel the number. note depending on the disc, you cannot perform time search. 4 press or repeatedly or the numeric buttons to select the title, track, folder or fle, etc. if you make a mistake, press clear to cancel the number. 5 press enter . fe system starts playback from the selected title, track, folder or fle, etc. to turn of the control menu press display repeatedly until the control menu disappears. tip when the control menu display is turned of, you can search for a chapter (dvd video and dvd-r/-rw in vr mode) or track (audio cd and video cd) or fle (divx video fles in data cd/dvd) by pressing the numeric buttons and enter . www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb playing mp3/jpeg discs notes fe system can recognize up to 200 folders, and will not play any folders beyond the 200th. (depending on the folder confguration, the number of folders that can be recognized by the system may decrease.) fe maximum number of mp3 audio tracks or jpeg image fles on a folder which this system can recognize is 150. fe system can play back mp3 audio tracks and jpeg image fles. fe system will play back any data with the extension .mp3, .jpg or .jpeg even if they are not in mp3 or jpeg format. playing this data may generate a loud noise which could damage your speaker system. depending on the encoding/writing sofware, recording device, or the recording media used to record an mp3 audio track, you may encounter problems such as cannot play back, sound interruptions and noise. fe following discs/situations can increase the time it takes to start playback: a disc recorded with a complicated tree structure. a disc recorded in multi session. a disc to which data can be added (non- fnalized disc). when the tracks or fles in another folder have just been played back. some cd-rs/-rws or dvd-rs/-rws/+rs/ +rws cannot be played back on the system depending on the fle format. fe system can play back to a depth of 8 folders only. fe system may not play certain types of jpeg image fles (ex. a jpeg image fle that is less than 8 (width) 8 (height)). selecting an mp3 audio track or folder 1 load a disc on the disc tray . folder list appears on the tv screen. if folder list does not apppear, press dvd/tuner menu . 2 press or repeatedly to select a folder. playingfaffolder: press (or ? on the unit) . fe system starts playback from the frst track of the selected folder. to stop playback, press . www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb disc continued playingfaftrack: 1 press enter . track list appears. 2 press or repeatedly to select the mp3 audio track you want, then press enter . fe system starts playing the selected mp3 audio track. to stop playback, press . to display the next or previous page of track list or folder list press or repeatedly when track list or folder list is displayed. to play back the next folder of mp3 audio tracks you can select the next folder by pressing repeatedly until the last track of the current folder, then press once. fe frst track of the next folder is selected. however, you cannot select the previous folder by pressing repeatedly. to select the previous folder, select the folder from folder list. to return to folder list when track list is displayed press return . to turn on or of folder list or track list press dvd/tuner menu repeatedly. selecting a jpeg image fle or folder 1 load a disc on the disc tray . folder list appears on the tv screen. if folder list does not apppear, press dvd/tuner menu . 2 press or repeatedly to select a folder. playingfaffolder: press (or ? on the unit) . fe system starts a slide show from the frst image fle of the selected folder. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb playingfanfimageffle: 1 press picture navi . fumbnail picture for the frst 16 jpeg image fles in the selected folder is displayed. if there are more than 16 image fles in the selected folder, the scroll bar appears at the right. 2 press / / / to select the image you want to view, then press (or ? on the unit) . fe slide show starts from the selected image fle. to stop playback, press . to display the next or previous page of folder list press or repeatedly when folder list is displayed. to display the next or previous jpeg image fle press or repeatedly during the slide show. to play back the next folder of jpeg image fles you can select the next folder by pressing repeatedly until the last fle of the current folder, then press once. fe frst fle of the next folder is selected. however, you cannot select the previous folder by pressing repeatedly. to select the previous folder, select the folder from folder list. to turn on or of folder list press dvd/tuner menu repeatedly. to rotate a jpeg image fle when a jpeg image fle is displayed on the tv screen, you can rotate the image by 90 degrees. press or repeatedly while viewing an image. press clear to return to the original view. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb disc notes fe picture navi button does not work when mode (music, image) is set to music. when you press or to select the next or previous image, the image will return to its original view even if you have rotated the image previously. fe slide show stops when you press or . playing mp3 audio tracks and jpeg image fles as a slide show with sound you can play back a slide show with sound by frst placing both jpeg image fles and mp3 audio tracks in the same folder on a data cd/dvd. 1 load a disc on the disc tray . 2 press display when playback is stopped. fe control menu appears on the tv screen. 3 press or repeatedly to select (mode (music, image)), then press enter . fe options for mode (music, image) appear on the tv screen. fe default setting is underlined. auto : plays back both jpeg image fles and mp3 audio tracks in the same folder as a slide show with sound. music: plays back mp3 audio tracks continuously. image: plays back jpeg image fles as a slide show. 4 press or repeatedly to select auto, then press enter . 5 press dvd/tuner menu . folder list appears on the tv screen. 6 press or repeatedly to select the folder you want, then press (or ? on the unit) . fe slide show with sound starts from the selected folder. to stop playback, press . continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb to turn on or of folder list press dvd/tuner menu repeatedly. to cancel slide show with sound select music or image in step 4. notes if there are no mp3 audio tracks in the disc and mode (music, image) is set to music, no audio data appears on the tv screen and the disc cannot be played back. if there are no jpeg image fles in the disc and mode (music, image) is set to image, no image data appears on the tv screen and the disc cannot be played back. if you play back a large data size of mp3 audio tracks and jpeg image fles at the same time, the sound may skip. specifying the slide show speed (jpeg image fles only) 1 press display repeatedly until the control menu for jpeg image fles appears on the tv screen. 2 press or repeatedly to select (interval), then press enter . fe options for interval appear on the tv screen. 3 press or repeatedly to select the transition interval you want. fe default setting is underlined. normal : sets to the standard duration. fast: sets the duration shorter than normal. slow 1: sets the duration longer than normal. slow 2: sets the duration longer than slow 1. 4 press enter . fe selected setting takes efect. note some jpeg image fles (especially progressive jpeg image fles or jpeg image fles with 3,000,000 pixels or more) may take a longer time to display than others, which may make the transitions seem longer than that of the option you selected. selecting a transition efect for image fles in the slide show (jpeg image fles only) 1 press display repeatedly until the control menu for jpeg image fles appears on the tv screen. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb disc 2 press or repeatedly to select (effect), then press enter . fe options for effect appear on the tv screen. 3 press or repeatedly to select the setting you want. fe default setting is underlined. mode 1 : fe image sweeps in from top to bottom of the screen. mode 2: fe image sweeps in from lef to right of the screen. mode 3: fe image stretches out from the center of the screen. mode 4: fe image randomly cycles through the efects. mode 5: fe next image slides over the current image. off: turns of this function. 4 press enter . fe selected setting takes efect. enjoying divx? video fles about divx video files divx ? is a video fle compression technology, developed by divx, inc. fis product is an ofcial divx ? certifed product. fis system can play back fles which have the extension .avi or .divx that contain data in divx format. notes fe system may not play back a divx video fle when the fle has been combined from two or more divx video fles. fe system cannot play back a divx video fle size of more than 720 (width) 576 (height)/2gb. depending on the divx video fle, the picture may be unclear or the sound may skip. fe system cannot play back some divx video fles that are longer than 3 hours. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb selecting a divx video fle or folder 1 load a data cd/dvd with divx video fles on the disc tray . folder list appears on the tv screen. if folder list does not apppear, press dvd/tuner menu . 2 press or repeatedly to select a folder. playingfaffolder: press (or ? on the unit) . fe system starts playing the frst divx video fle of the selected folder. to stop playback, press . playingfafdivxfvideoffle: 1 press enter . file list appears. 2 press or repeatedly to select the divx video fle you want, then press enter . fe system starts playing the selected of divx video fles. to stop playback, press . to display the next or previous page of file list or folder list press or repeatedly when file list or folder list is displayed. to play back the next folder of divx video fles you can select the next folder by pressing repeatedly until the last fle of the current folder, then press once. fe frst fle of the next folder is selected. however, you cannot select the previous folder by pressing repeatedly. to select the previous folder, select the folder from folder list. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb disc to return to folder list when file list is displayed press return . to turn on or of folder list or file list press dvd/tuner menu repeatedly. notes depending on the divx video fle, the picture may pause or be unclear. in this case, it is recommended that you create the fle at a lower bit rate. if the sound is still noisy, mp3 is the recommended audio format. note that, this system does not conform to wma (windows media audio)/aac (advanced audio coding) format. due to the compression technology used for divx video fles, it may take some time afer you press for the picture to appear. depending on the divx video fle, the sound may not match the pictures on the screen. fe system can recognize up to 150 divx video fles in a single folder. a maximum of 200 folders can be recognized. tip if the number of viewing times has been preset, you can play back the divx video fles as many times as the preset number. fe following occurrences are counted: when the system is turned of. when the disc is removed. when another divx video fle is played back. adjusting the delay between the picture and sound a/v sync when the sound does not synchronize with the pictures on the screen, you can adjust the delay between the picture and sound. a/v sync does not work for mp3 audio tracks and jpeg image fles in data cd/dvd. 1 press display . fe control menu appears on the tv screen. 2 press or repeatedly to select (a/v sync), then press enter . fe options for a/v sync appear on the tv screen. 3 press or repeatedly to select the setting you want. fe default setting is underlined. off : does not adjust. on: adjusts the diference between picture and sound. 4 press enter . note depending on the input stream, this function may not be efective. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 0 gb restricting playback of the disc parental control you can limit the playback of some dvd videos according to a predetermined level such as the age of the users. when a limited scene is played back, that scene may be skipped or replaced with diferent scenes. 1 press display when playback is stopped. fe control menu appears on the tv screen. 2 press or repeatedly to select (setup), then press enter . fe options for setup appear on the tv screen. 3 press or repeatedly to select custom, then press enter . fe setup menu appears on the tv screen. 4 press or repeatedly to select system setup, then press enter . 5 press or repeatedly to select parental control, then press enter . iffyoufhavefnotfregisteredfaf password: fe display for registering a new password appears on the tv screen. enter a 4-digit password using the numeric buttons , then press enter . fe display for confrming the password appears on the tv screen. whenfyoufhavefalreadyfregisteredf afpassword: fe display for entering the password appears on the tv screen. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb disc 6 enter or re-enter your 4-digit password using the numeric buttons , then press enter . fe display for setting the playback limitation level appears on the tv screen. 7 press or repeatedly to select standard, then press enter . fe options for standard appear on the tv screen. 8 press or repeatedly to select a geographic area as the playback limitation level, then press enter . fe area is selected. when you select others , enter the area code for the geographic area you want by using the numeric buttons (see parental control area code list (page 144)). 9 press or repeatedly to select level, then press enter . fe options for level appear on the tv screen. 10 press or repeatedly to select the level you want, then press enter . parental control setting is completed. fe lower the value, the stricter the limitation. if you make a mistake when entering your password press repeatedly to delete the number you have entered, then re-enter your password again. to turn of the parental control function set level to off in step 10. to play back a disc for which parental control is set 1 load the disc and press (or ? on the unit) . fe display for entering your password appears on the tv screen. 2 enter your 4-digit password using the numeric buttons , then press enter . fe system starts playback. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb notes when you play back dvd videos which do not have the parental control function, playback cannot be limited on this system. depending on the dvd video, you may be asked to change the parental control level while playing the disc. in this case, enter your password, then change the level. if resume play is canceled, the level returns to the original level. tip if you forget your password, remove the disc and repeat steps 1 to 5 of restricting playback of the disc (page 60). when you are asked to enter your password, enter 199703 using the numeric buttons , then press enter . fe display will ask you to enter a new 4-digit password. afer you enter a new 4-digit password, reload the disc and press (or ? on the unit) . when the display for entering your password appears, enter your new password. changing the password 1 press display when playback is stopped. fe control menu appears on the tv screen. 2 press or repeatedly to select (setup), then press enter . fe options for setup appear on the tv screen. 3 press or repeatedly to select custom, then press enter . fe setup menu appears on the tv screen. 4 press or repeatedly to select system setup, then press enter . 5 press or repeatedly to select parental control, then press enter . fe display for entering the password appears on the tv screen. 6 enter your 4-digit password using the numeric buttons , then press enter . 7 press or repeatedly to select change password, then press enter . 8 enter your 4-digit password using the numeric buttons , then press enter . www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb disc 9 enter a new 4-digit password using the numeric buttons , then press enter . 10 to confrm your password, re-enter it using the numeric buttons , then press enter . if you make a mistake when entering your password press repeatedly to delete the number you have entered, then re-enter your password again. using the setup menu by using the setup menu, you can make various adjustments to items such as picture and sound. displayed items vary depending on the country or region. note playback settings stored in the disc take priority over the setup menu settings. ferefore, some of the setup menu settings may not be performed. 1 press display when playback is stopped. fe control menu appears on the tv screen. 2 press or repeatedly to select (setup), then press enter . fe options for setup appear on the tv screen. 3 press or repeatedly to select custom, then press enter . fe setup menu appears on the tv screen. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb 4 press or repeatedly to select the setup item from the displayed list: language setup, video setup, audio setup, system setup or speaker setup. then press enter . fe setup item is selected. example: video setup selected item setup items 5 press or repeatedly to select the item you want, then press enter . fe options for the selected item appear on the tv screen. example: tv type options 6 press or repeatedly to select the setting you want, then press enter . fe setting is selected and setup is completed. selected setting setup menu item list setting the language set various languages for the on-screen display or sound track. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb disc continued osd (on-screen display) switches the language of the on-screen display. menu* (dvd video only) select the language for the dvd menu. audio* (dvd video only) switches the language of the sound track. when you select original, the language given priority in the disc is selected. subtitle* (dvd video only) switches the language of the subtitle. when you select audio follow, the language for the subtitles changes according to the language you selected for the sound track. * when you select a language in menu, audio, or subtitle that is not recorded on the dvd video, one of the recorded language is automatically selected. however, depending on the disc, the language may not be selected automatically. if you select others in menu, audio, and subtitle enter a language code using the numeric buttons (see language code list (page 143)). setting the tv screen video setup choose the settings according to the tv you connected. fe default setting is underlined. tvftype 1) (dvd video only) 16:9: select this when you connect a wide-screen tv or a tv with a wide mode function. 4:3 letter box: select this when you connect a 4:3 screen tv. fis setting displays a wide picture with bands on the upper and lower portions of the screen. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) gb 4:3 pan scan 2) : select this when you connect a 4:3 screen tv. fis setting displays the wide picture on the entire screen and cuts of the portions that do not ft. progressivef(componentfout) sets the progressive signal output from the component video out jacks to on or of. off : outputs interlace signals. on: outputs progressive signals. for details, see changing the format of the video signal output from component video out jacks (page 28). colorfsystemf(videofcd) (except for russian and latin american models) select the output video signal when you play back a video cd. auto : outputs the video signal according to the color system of the disc, either pal or ntsc. pal: changes the video signal of an ntsc disc and output it in pal system. ntsc: changes the video signal of a pal disc and output it in ntsc system. blackflevel (latin american model only) selects the black level (setup level) for the video signals output from the jacks other than component video out. on : sets the black level of the output signal to the standard level. off: lowers the standard black level. use this when the picture becomes too white. blackflevelf(componentfout) (latin american model only) selects the black level (setup level) for the video signals output from the component video out jacks. black level (component out) setting is not available when the system outputs progressive signal. off : raises the standard black level. use this when the picture becomes too black. on: sets the black level of the output signal to the standard level. pausefmode (dvd video and dvd-r/-rw in vr mode only) auto : fe picture, including subjects that move dynamically, is output with no jitter. normally select this position. frame: fe picture, including subjects that do not move dynamically, is output in high resolution. 1) fe default setting varies depending on the country or region. 2) depending on the dvd video, 4:3 letter box may be selected automatically instead of 4:3 pan scan or vice versa. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb disc setting the audio options audio setup confgure audio related settings. fe default setting is underlined. audiofdrc 1) f(dynamicfrangef compression) (dvd video only) off : no compression of dynamic range. standard: reproduces the sound track with the kind of dynamic range that the recording engineer intended. useful for watching movies at low volume late at night. max: narrows the dynamic range fully. trackfselection (dvd video only) gives priority to the sound track which contains the highest number of channels when you play back a dvd video on which multiple audio (pcm, dts, mpeg audio, or dolby digital) formats 2) are recorded. off : no priority given. auto 3) : priority given. 1) audio drc can only be performed with dolby digital sources. 2) if each audio sound track has the same number of channels, the system selects the audio sound tracks in the order from pcm, dts, dolby digital, to mpeg. 3) when you set track selection to auto, the language may change. fe track selection setting has higher priority than the audio settings in language setup (page 64). however, depending on the disc, this function may not be performed. setting the system system setup screenfsaver fe screen saver will help prevent your display device from becoming damaged (ghosting). press any button (e.g., ) to cancel the screen saver. on : fe screen saver image appears if you do not operate the system for about 15 minutes. off: fe screen saver does not appear. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb background selects the background color or picture to be displayed on the tv screen. fe background color or picture is displayed when playback is stopped or while playing an audio cd and mp3 audio tracks. jacket picture : fe jacket picture (still picture) appears in the background, but only when the jacket picture is already recorded on the disc (dvd video, cd-extra, etc.). if the disc does not contain a jacket picture, the graphics picture appears. graphics: a preset picture stored in the system appears in the background. blue: fe background color is blue. black: fe background color is black. parentalfcontrol sets the playback restrictions. for details, see restricting playback of the disc (page 60). divx displays the registration code for this system. for more information, go to http://www. divx.com on the internet. multi-discfresume (dvd video and video cd only) on : stores the resume playback point in the memory for up to 10 discs. off: does not store the resume playback point in the memory. playback starts at the resume playback point only for the current disc in the system. reset* returns setup settings to the default settings. for details, see to return the setup settings to the default settings*, perform reset as follows: (page 130). * except for parental control settings setting the speakers 1) speaker setup to obtain the best possible surround sound, set the connection of the speakers and their distance from your listening position. fen, use the test tone to adjust the level of the speakers to the same level. setting items difer according to the model. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb disc continued connection front: yes center (mhc-gzr9d/gzr8d only): yes : normally select this. none: select this if the center speaker is not connected. surround (mhc-gzr9d/gzr8d only): behind : select this if the surround speakers are located in section . side: select this if the surround speakers are located in section . none: select this if the surround speakers are not connected. position diagram subwoofer 2) : yes : select this if you have connected the subwoofer. none: select this if the subwoofer is not connected. distancef(mhc-gzr9d/gzr8df only) ) front 3.0 m 4) : front speaker distance from the listening position can be set. center 3.0 m 5) : center speaker distance from the listening position can be set. surround 3.0 m 4)5) : surround speaker distance from the listening position can be set. levelf(front) ) for mhc-gzr9d/gzr8d, be sure to set test tone to on for easy adjustment. l 0.0 db r 0.0 db center 2.0 db (mhc-gzr9d/ gzr8d only): subwoofer 3.0 db (mhc-gzr9d), 0.0 db (MHC-GZR8D/gzr7d): depending on the subwoofer, the sound output may be smaller compared to other speakers when you adjust this level during the test tone. levelf(surround)f(mhc-gzr9d/ gzr8dfonly) 7) you can adjust the level of each surround speakers as follows. be sure to set test tone to on for easy adjustment. l 0.0 db r 0.0 db www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 70 gb testftonef(mhc-gzr9d/gzr8df only) off : fe test tone is not emitted from the speakers. on: fe test tone is emitted from each speaker in sequence. fe test tone is emitted from the selected speakers when you select level (front) or level (surround). 1 press / / / repeatedly to select the desired speaker or the level. 2 press enter . 3 repeat step 1 and 2. press / / / repeatedly to set test tone to off when you have fnished adjusting the speaker level. 1) to return to the default setting when changing a setting, press clear before you press enter . however, note that you cannot return the setting of connection to default setting. note that you cannot perform speaker setup when you connect headphones or microphones to the unit. 2) depending on the settings of other speakers, the subwoofer may output excessive sound. 3) fe items that are set to none in connection cannot be selected. when you perform quick setup (page 34), the default settings are changed. 4) if each lef and right speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. 5) fe setting range changes depending on the front speaker setting. 6) fe items that are set to none in connection cannot be selected. 7) fis setting cannot be selected when surround is set to none in the connection setting. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 71 gb tuner tuner listening to the radio you can listen to a radio station either by selecting a preset station, or by manually tuning in the station. listening to a preset radio station 1 press function +/ repeatedly to select tuner fm or tuner am (or press tuner/ band on the unit repeatedly to select fm or am). 2 press and hold tuning +/ until the frequency indication changes and then release. auto fashes in the display. scanning stops automatically when a station is tuned in and tuned lights up in the display. when a fm stereo program is tuned in, stereo lights up in the display. if tuned does not appear and the scanning does not stop, press tuning +/ repeatedly to tune in the station you want. 3 press dvd/tuner menu . memory? fashes in the display. 4 press enter or . a preset number fashes in the display. fe stations are stored from preset number 1. preset number 5 press or repeatedly to select the preset number you want. 6 press enter . complete appears in the display. fe station is stored. 7 repeat steps 1 to 6 to store other stations. you can preset up to 20 fm stations and 10 am stations. fe preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb 8 to listen to a preset station, press preset +/ repeatedly (or turn operation dial on the unit clockwise or counterclockwise) to select the preset station you want. you can also press the numeric buttons , then press enter to select a preset station. to stop automatic scanning press . to cancel presetting press dvd/tuner menu . listening to a non-preset radio station/station with a weak signal 1 press function +/ repeatedly to select tuner fm or tuner am (or press tuner/ band on the unit repeatedly to select fm or am). 2 tune in the station you want. forfmanualftuning: press tuning +/ repeatedly. forfdirectftuning: press d.tuning , then use the numeric buttons to enter the frequency of the station you want. for example, press 1, 0, 2, 5 and 0 to enter the frequency of fm 102.50 mhz, then press enter . if you cannot tune in the station, make sure you have entered the right frequency. if you still cannot tune in the station, the frequency is not used in your area. to cancel direct tuning press d.tuning . to change the am tuning interval (except for russian and saudi arabian models) fe am tuning interval is factory-preset to 9 khz or 10 khz (for some areas). 1 press function +/ repeatedly to select tuner am (or press tuner/band repeatedly to select am). 2 press / to turn of the system. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb tuner 3 press display repeatedly until sony demo appears in the display. 4 press / on the unit while holding down tuning + on the unit. am 9k step or am 10k step appears in the display. when you change the interval, all the am preset stations are erased. tips to improve broadcast reception, adjust the supplied antennas, or connect an external antenna. when an fm stereo program has static noise, press repeat/fm mode repeatedly until mono lights up in the display. fere will be no stereo efect, but the reception will improve. you can also set the frequency by viewing the tuner information on the tv screen. current station current band and preset number www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb tape playing a tape you can use type i (normal) tape. 1 press function +/ (or tape a/b on the unit) repeatedly to select tape a or tape b. 2 insert a tape. press push on the unit to insert a tape into the cassette holder with the side you want to play back facing forward. make sure there is no slack in the tape to avoid damaging the tape or the cassette holder. 3 press options on the unit. timer menu appears in the display. 4 press or repeatedly (or turn operation dial on the unit clockwise or counterclockwise) until direction appears, then press enter . cycle appears in the display. 5 press or repeatedly (or turn operation dial on the unit clockwise or counterclockwise) to select 1way to play one side. select cycle 1) to play both sides or relay 2) to play both decks in succession. 6 press enter . 7 press (or ? on the unit) . fe tape starts playing. to play the reverse side, press the button again 3) . front side indicator reverse side indicator 1) for the tape in deck b only. fe playback stops automatically afer repeating the sequence fve times. 2) relay play follows this sequence: deck a (front side) deck b (front side) deck b (reverse side) 3) for the tape in deck b only. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb tape continued other operations to dofthis stop playback press . pause playback press . press again to resume playback. fast-forward or rewind press or . tip if you press (or ? on the unit) when tape a is selected and there is no tape in deck a, the system automatically switches to tape b when there is a tape in deck b or vice versa. fen, playback will start. recording onto a tape fere are three ways to record on a type i (normal) tape. use the buttons on the unit for the operation. fe recording level is adjusted automatically. cdfsynchrofrecording you can record an entire video cd, audio cd, or data cd/dvd (mp3 audio tracks only) onto a tape. manualfrecording you can record just the portion you want from a sound source, including connected audio components. soundfmixing you can mix sound from any one of the sound sources and singing or speaking into a microphone. fe mixed sound can be recorded onto a tape. 1 insert a recordable tape into the deck b, then press tape a/b repeatedly to select tape b. 2 press options . timer menu appears in the display. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 7 gb 3 turn operation dial clockwise or counterclockwise until direction appears, then press enter . cycle appears in the display. 4 turn operation dial clockwise or counterclockwise to select 1way to record on one side. select relay or cycle to record on both sides. then, press enter . 5 press ? repeatedly to select recording side, then press . if you select both sides recording or front side recording, press ? repeatedly to light up the indicator, then press . if you record on the reverse side, press ? repeatedly to light up the indicator, then press . 6 prepare the recording source. forfcdfsynchrofrecording: press dvd and load the disc you want to record. if you have already loaded the disc, press disc 1 disc 3 to select the disc. when the system automatically starts playback, press twice to cancel resume play. forfmanualfrecordingfandfsoundf mixing: select the desired source to record or mix. if you record a disc manually, start playing the disc frst, then perform steps 7 and 8. to record only your favorite cd tracks, perform steps 1 to 6 of creating your own program (page 44). to record only sound from a microphone, press usb to select usb, and do not start playing the usb device in step 8. 7 set the deck b to stand by for recording. forfcdfsynchrofrecording: press rec to tape . if the play mode is set to shufe play, program play or repeat play, it automatically switches to normal play. forfmanualfrecordingfandfsoundf mixing: press rec to tape . 8 start recording. forfcdfsynchrofrecording: press enter . when the recording is completed, the system stops automatically. forfmanualfrecording: press enter , and then start playing the desired recording source. if there is noise while recording from the tuner, reposition the appropriate antenna to reduce the noise. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 77 gb tape forfsoundfmixing: press enter , and then start playing the desired source and start singing or speaking into the microphone. if acoustic feedback (howling) occurs, reduce the volume, move the microphone away from the speakers, or change the direction of the microphone. to stop recording press . notes cd synchro recording is not available with dvds. you cannot listen to other sources while recording. when you press rec to tape in step 7, the surround efect may automatically change. when you record from a video cd, playback with pbc functions is automatically canceled (cd synchro recording only). when you press rec to tape or when you connect a microphone in dvd function, the following sound feld is automatically selected. mhc-gzr9d/gzr8d link if the headphones are not connected. hp 2ch if the headphones are connected. mhc-gzr7d 2ch stereo if the headphones are not connected. hp 2ch if the headphones are connected. if you connect or disconnect a microphone or headphones during recording, the sound may cut of for a moment. when dvd function or usb function is selected, karaoke mode is automatically turned on when you connect a microphone to mic jack . do not eject the tape during recording, as this may cause irreparable damage to the tape and the tape deck. if you press rec to tape during manual recording or sound mixing, the recording is paused. to resume recording, press rec to tape again. fe system may continue playback of other discs even afer the synchro recording is completed. tips for video cd or audio cd, if you select both sides recording and the tape reaches the end of the front side part-way through a track, the entire track is recorded again from the beginning of the reverse side (cd synchro recording only). when you record on both sides, be sure to start from the front side. if you start from the reverse side, recording stops at the end of the reverse side. when high level sound signals are input, the system automatically adjusts the recording level to prevent distortion of the recorded sound signal (auto level control function). www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 78 gb usbfdevice transferring music from a disc to an usb device you can connect an optional usb device to the (usb) port on the unit and transfer music from a disc to the usb device. you can transfer music from an audio cd or data cd/dvd (mp3 audio tracks only) only. fe audio format of fles transferred by this system is mp3. fe amount of free space required on the usb device is about 1 mb per minute when transferring music from an audio cd. required free space may be larger when transferring music from a data cd/ dvd (mp3 audio tracks only). refer to compatible usb devices (supplement) for a list of usb devices that can be connected to this system. fe transferred music is limited to private use only. use of the music beyond this limit requires permission of the copyright holders. notefonfthefmaximumfnumberfoff tracks,fflesfandffoldersfonfanfusbf device fis system cannot transfer music from a disc in the following cases. C when the number of tracks or fles on a folder exceeds 150. C when the number of folders on an usb device exceeds 200. fese numbers may vary depending on the track structure, the fle structure and the folder structure. 1 connect an usb device to the (usb) port as shown below. insert an usb device when usb cable connection is necessary, connect the usb cable supplied with the usb device to be connected. see the operating instructions supplied with the usb device to be connected for details on the operation method. when the usb device is connected, reading appears and usb memory lights up in the display. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 79 gb usb device notes do not use the usb devices other than those listed in compatible usb devices (supplement). operation of models not listed is not guaranteed. operation is not guaranteed, even when using these usb devices. when inserting the usb device, make sure of the direction and insert it all the way to the (usb) port on the unit. do not forcibly insert the usb device, as this may cause the device to be damaged. do not insert other device or objects besides the usb device. it may take about 10 seconds before reading appears in the display depending on the type of usb device connected. 2 press function +/ repeatedly to select dvd (or press dvd on the unit). 3 load the disc you want to transfer. if you have loaded the disc, press disc skip repeatedly (or disc 1 disc 3 on the unit) to select the disc. when the system automatically starts playback, press twice to cancel resume play. to remove the usb device 1 press to stop playback. 2 press to turn of the system. 3 remove the usb device. using the front panel display you can easily transfer all the music on a disc to an usb device (synchronized transfer). you can also transfer a single audio track during playback (rec 1). 1 set the usb device to stand by for transferring. synchronizedftransfer: press twice to cancel resume play, then press rec to usb on the unit. recf1: start playing the track you want to transfer, then press rec to usb on the unit. reading appears, and the display cycles between xxxmb free (remaining space on the usb device) and push enter. fe usb device stands by for transferring. 2 press enter . usb, rec and sync light up and transferring starts. no sound is output during transfer. when the transfer is completed, the system stops automatically. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 80 gb using the on-screen display 1 press display when playback is stopped. fe control menu appears on the tv screen. 2 press or repeatedly to select (usb recording), then press enter . fe options for usb recording appear on the tv screen. 3 press or repeatedly to select the desired option, then press enter . forfaudiofcd: ? track: fe tracks on the audio cd appear. you can transfer the desired track. forfdatafcd/dvd: ? track: fe folders on the data cd/dvd appear. you can transfer the desired mp3 audio track. ? folder: fe folders on the data cd/dvd appear. you can transfer all mp3 audio tracks in the folder. reading. appears, and the tracks or folders appear on the tv screen. note it may take some time to display the tracks or folders depending on the number of tracks or folders. 4 select the tracks that you want to transfer. forfaudiofcd: press or repeatedly to select the track, then press enter . fe tracks are marked in the order that you select. to cancel the selection, press enter again. remaining space of the usb device tracks to be transferred tofselectfallftracksfonfthefaudiof cd press / / / repeatedly to select all, then press enter . to cancel the selection, select all, then press enter . www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 81 gb usb device continued forfdatafcd/dvd: press or repeatedly to select the mp3 audio tracks or folders, then press enter . fe mp3 audio tracks or folders are marked. to cancel the selection, press enter again. remaining space of the usb device mp3 audio tracks or folders to be transferred tofselectfallftracksforffoldersfonf thefdatafcd/dvd press / / / repeatedly to select all, then press enter . to cancel the selection, select all, then press enter . 5 press / / / repeatedly to select start, then press enter . fe system starts transferring and the transfer status appears. no sound is output during transfer. to stop transferring, press . to return to the previous display press return . to erase audio tracks or folders from the usb device you can erase audio tracks or folders on the usb device. 1 press function +/ repeatedly to select usb (or press usb on the unit). folder list appears. 2 press or repeatedly to select a folder. to erase all audio tracks in a folder, press clear . to erase an audio track, press enter . track list appears. press or repeatedly to select the desired audio track, then press clear . 3 press or repeatedly to select yes, then press enter . to cancel, select no, then press enter . www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb folder and track generation rules when frst transferring music to an usb device, a music folder is created directly below the root. folders and tracks are generated within this music folder as follows: fwhenftransferringfmusicffromfanf audiofcd in stop mode 1) : folder name: fldr001 2) track name: track001 2) during playback: folder name: rec1-cd 3) track name: track001 2) fwhenftransferringfmusicffromfaf datafcd/dvdf(mp faudioftracksf only) in stop mode 1) : folder name: same as the transferred folder 4) track name: same as the transferred track 5) during playback: folder name: rec1-mp3 3) track name: same as the transferred track 5) 1) except when resuming playback. 2) folder and tracks numbers are assigned serially thereafer. 3) a new track is created in the rec1-cd or rec1-mp3 folder each time a transfer is performed. 4) up to 64 characters of the name are assigned. 5) up to 60 characters of the name are assigned. notes do not remove the usb device during transfer or erase operations. doing so may corrupt the data on the usb device or damage the usb device itself. do not connect the system and the usb device through an usb hub. when transferring music from an audio cd, the tracks are transferred as 128 kbps mp3 audio tracks. when transferring music from a data cd/dvd, mp3 audio tracks are transferred with the same bit rate as the original mp3 audio tracks. cd text information is not transferred in the created mp3 audio tracks. transferring stops automatically if: the usb device runs out of space during the transfer process. the number of tracks and folders on the usb device reaches the limit for the number that the system can recognize. up to 150 audio tracks can be contained on a single folder and up to 200 folders can be contained on a single usb device. fe maximum number of audio tracks and folders may vary depending on the audio tracks and folder structure. if the folder to be erased contains non-mp3/ wma (windows media audio)/aac format audio tracks or sub folders, these are not erased. if a folder or audio track that you are trying to transfer already exists on the usb device with the same name, a sequential number is added afer the name without overwriting the original folder or track. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb usb device continued recording analog audio to an usb device you can record the sound from analog audio sources. 1 connect an usb device to the (usb) port . 2 press function +/ repeatedly to select the desired source. ? tape a/b: to record from this systems tape deck. 1)2)3) ? tuner fm/am: to record from this systems tuner. ? dmport: to record from the optional digital media port adapter connected to the dmport. ? video/sat: to record from the optional component connected to the video sat audio in l/r jacks. 1) if the playback direction of the tape is set to cycle, the system will record both sides of the tape fve times. if you want to stop at one recording, be sure to set the playback direction of the tape to relay or 1way. 2) recording continues even though tape playback has ended. 3) recording stops afer playing deck a even when the playback direction of the tape is set to relay. 3 press rec to usb on the unit. please wait appears and the display cycles between xxxmb free (remaining space on the usb device) and push enter. fe usb device stands by for recording. 4 start playing the desired source to record, then press enter . usb and rec light up and recording starts. to stop recording, press . to remove the usb device 1 press to stop playback. 2 press to turn of the system. 3 remove the usb device. to mark track numbers you can mark the track numbers during recording of any source. press rec to usb on the unit during recording at the point you want to add a track mark. new track appears and a track mark is added. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb folder and track generation rules when frst recording the analog audio to an usb device, a music folder is created directly below the root. folders and tracks are generated within this music folder as follows: fwhenfrecordingffromftheftapef deck folder name: tape001* track name: track001* fwhenfrecordingffromftheftuner folder name: fm001* or am001* track name: track001* fwhenfrecordingffromfthefdmport folder name: dmport001* track name: track001* fwhenfrecordingffromfthefvideo/ satfaudiofinfl/rfjacks folder name: video001* or sat001* track name: track001* * folder and track numbers are assigned serially thereafer. notes do not remove the usb device during recording operation. doing so may corrupt the data on the usb device or damage the usb device itself. do not connect the system and the usb device through an usb hub. each time you press rec to usb on the unit during recording, the system pauses recording for a few seconds to add a new track mark. no sound is recorded during this time. fe track numbers are automatically marked when you record more than 60 minutes. recording stops automatically when: you change the function. you turn of the system. the usb device runs out of space during the recording. the number of audio tracks on the usb device reaches the limit for the number that the system can recognize. fe sound is recorded as 128 kbps mp3 audio track. up to 150 audio tracks can be contained on a single folder and up to 200 folders can be contained on a single usb device. fe maximum number of audio tracks and folders may vary depending on the audio tracks and folder structure. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb usb device continued listening to music of an usb device you can listen to music stored in the usb device. fe audio formats that can be played back by this system are as follows: mp3*/wma*/aac* refer to compatible usb devices (supplement) for a list of usb devices that can be connected to this system. * files with copyright protection (digital rights management) cannot be played by this system. notefonfthefmaximumfnumberfoff tracks,fflesfandffoldersfonfanfusbf device fis system cannot play an usb device in the following cases. C when the number of tracks or fles on a folder exceeds 150. C when the number of folders on an usb device exceeds 200. fese numbers may vary depending on the track structure, the fle structure and the folder structure. 1 press function +/ repeatedly to select usb (or press usb on the unit). 2 connect an usb device to the (usb) port . when usb cable connection is necessary, connect the usb cable supplied with the usb device to be connected. see the operating instructions supplied with the usb device to be connected for details on the operation method. when the usb device is connected, reading appears and usb memory lights up in the display. notes do not use the usb devices other than those listed in compatible usb devices (supplement). operation of models not listed is not guaranteed. operation is not guaranteed, even when using these usb devices. when inserting the usb device, make sure of the direction and insert it all the way to the (usb) port on the unit. do not forcibly insert the usb device, as this may cause the device to be damaged. do not insert other device or objects besides the usb device. it may take about 10 seconds before reading appears in the display depending on the type of usb device connected. to remove the usb device 1 press to stop playback. 2 press to turn of the system. 3 remove the usb device. notesfonfthefusbfdevice fe system can play back up to 200 folders, including folders that do not contain mp3 audio tracks and jpeg image fles. fe fle formats that this system can play are as follows: mp3: fle extension .mp3 wma: fle extension .wma aac: fle extension .m4a jpeg: fle extension .jpg or .jpeg fe system will play back any data with the extension above even if they are not in mp3/wma/aac/jpeg format. playing this data may generate a loud noise which could damage your speaker system. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 8 gb fe following usb devices/situations can increase the time it takes to start playback: an usb device recorded with a complicated tree structure. when the tracks or fles in another folder have just been played back. some usb devices cannot be played back on the system depending on the fle format. fe system can play back to a depth of 8 folders only. when the usb device is inserted, the system reads all the fles on the usb device. if there are many folders or fles on the usb device, it may take a long time to fnish reading the usb device. do not connect the system and the usb device through an usb hub. with some connected usb devices, afer an operation is performed, there may be a delay before it is performed by this system. resume play is canceled when you turn of the system. fis system does not necessarily support all the functions provided in a connected usb device. tracks transferred by a device such as a computer may not be played back in the order in which they were recorded. fe playback order for the system may difer from the playback order of the connected usb device. always turn of the system before removing the usb device. removing the usb device while the system is on may corrupt the data on the usb device. do not save other types of fles or unnecessary folders on an usb device that has audio tracks or jpeg image fles. folders that have no audio tracks or jpeg image fles are skipped. fe maximum number of audio tracks and folders that can be contained on a single usb device is 200 (including the root and music folders). fe maximum number of audio tracks and folders may vary depending on the fle and folder structure. compatibility with all encoding/writing sofwares, recording devices, and recording media cannot be guaranteed. incompatible usb device may produce noise or interrupted audio or may not play at all. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 87 gb usb device continued selecting an audio track or folder 1 press display when playback is stopped. fe control menu appears on the tv screen. 2 press or repeatedly to select (mode (music, image)), then press enter . fe options for mode (music, image) appear on the tv screen. 3 press or repeatedly to select music, then press enter . 4 press dvd/tuner menu . folder list appears on the tv screen. 5 press or repeatedly to select a folder. playingfaffolder: press (or ? on the unit) . fe system starts playback from the frst track of the selected folder. to stop playback, press . playingfaftrack: 1 press enter . track list appears. 2 press or repeatedly to select the audio track you want, then press enter . fe system starts playing the selected audio track. to stop playback, press . to display the next or previous page of track list or folder list press or repeatedly when track list or folder list is displayed. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 88 gb to play back the next folder of audio tracks you can select the next folder by pressing repeatedly until the last track of the current folder, then press once. fe frst track of the next folder is selected. however, you cannot select the previous folder by pressing repeatedly. to select the previous folder, select the folder from folder list. to return to folder list when track list is displayed press return . to turn on or of folder list or track list press dvd/tuner menu repeatedly. selecting a jpeg image fle or folder 1 press display when playback is stopped. fe control menu appears on the tv screen. 2 press or repeatedly to select (mode (music, image)), then press enter . fe options for mode (music, image) appear. 3 press or repeatedly to select image, then press enter . 4 press dvd/tuner menu . folder list appears on the tv screen. 5 press or repeatedly to select a folder. playingfaffolder: press (or ? on the unit) . fe system starts a slide show from the frst image fle of the selected folder. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 89 gb usb device continued playingfanfimageffle: 1 press picture navi . fumbnail picture for the frst 16 jpeg image fles in the selected folder is displayed. if there are more than 16 image fles in the selected folder, the scroll bar appears at the right. 2 press / / / to select the image you want to view, then press (or ? on the unit) . fe slide show starts from the selected image fle. to stop playback, press . to display the next or previous page of folder list press or repeatedly when folder list is displayed. to display the next or previous jpeg image fle press or repeatedly during the slide show. to play back the next folder of jpeg image fles you can select the next folder by pressing repeatedly until the last fle of the current folder, then press once. fe frst fle of the next folder is selected. however, you cannot select the previous folder by pressing repeatedly. to select the previous folder, select the folder from folder list. to turn on or of folder list press dvd/tuner menu repeatedly. to rotate a jpeg image fle when a jpeg image fle is displayed on the tv screen, you can rotate the image by 90 degrees. press or repeatedly while viewing an image. press clear to return to the original view. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 90 gb notes fe picture navi button does not work when mode (music, image) is set to music. when you press or to select the next or previous image, the image will return to its original view even if you have rotated the image previously. fe slide show stops when you press or . fe maximum number of audio tracks or jpeg image fles on a folder which this system can recognize is 150. if there are no audio tracks in the usb device and mode (music, image) is set to music, no audio data appears on the tv screen and the usb device cannot be played back. if there are no jpeg image fles in the usb device and mode (music, image) is set to image, no image data appears on the tv screen and the usb device cannot be played back. specifying the slide show speed (jpeg image fles only) 1 press display repeatedly until the control menu for jpeg image fles appears on the tv screen. 2 press or repeatedly to select (interval), then press enter . fe options for interval appear on the tv screen. 3 press or repeatedly to select the transition interval you want. fe default setting is underlined. normal : sets to the standard duration. fast: sets the duration shorter than normal. slow 1: sets the duration longer than normal. slow 2: sets the duration longer than slow 1. 4 press enter . fe selected setting takes efect. note some jpeg image fles (especially progressive jpeg image fles or jpeg image fles with 3,000,000 pixels or more) may take a longer time to display than others, which may make the transitions seem longer than that of the option you selected. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 91 gb usb device selecting a transition efect for image fles in the slide show (jpeg image fles only) 1 press display repeatedly until the control menu for jpeg image fles appears on the tv screen. 2 press or repeatedly to select (effect), then press enter . fe options for effect appear on the tv screen. 3 press or repeatedly to select the setting you want. fe default setting is underlined. mode 1 : fe image sweeps in from top to bottom of the screen. mode 2: fe image sweeps in from lef to right of the screen. mode 3: fe image stretches out from the center of the screen. mode 4: fe image randomly cycles through the efects. mode 5: fe next image slides over the current image. off: turns of this function. 4 press enter . fe selected setting takes efect. playing in random order shufe play you can play back the tracks on the usb device in random order. each time you perform shufe play, the playing order may difer. 1 press display . fe control menu appears on the tv screen. 2 press or repeatedly to select (shuffle), then press enter . fe options for shuffle appear on the tv screen. 3 press or repeatedly to select the setting you want. on (music): all audio tracks in the selected folder on the usb device is played back randomly. when no folder is selected, the frst folder is played back randomly. 4 press enter . shufe play starts. to cancel shufe play, press clear or select off in step 3. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb to turn of the control menu press display repeatedly until the control menu disappears from the tv screen. notes shufe play is canceled when: you remove the usb device. you turn of the system. you change the function. you set mode (music, image) to image when playback is stopped. fe same song may be played back repeatedly for audio tracks. playing repeatedly repeat play you can play the audio tracks and jpeg image fles on the usb device repeatedly. you can select shufe play at the same time. 1 press display . fe control menu appears on the tv screen. 2 press or repeatedly to select (repeat), then press enter . fe options for repeat appear on the tv screen. 3 press or repeatedly to select the setting you want. memory: repeats all the folders on the usb device. folder: repeats the current folder. track*: repeats the current track. * audio tracks only. whenfshufefplayfisfactivated:f on: repeats the shufe play. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb usb device 4 press enter . 5 press (or ? on the unit) . repeat play starts. to cancel repeat play, press clear or select off in step 3. to turn of the control menu press display repeatedly until the control menu disappears from the tv screen. notes you can also change the repeat play setting by pressing repeat/fm mode repeatedly. rep lights up in the display when repeat play is set to memory, folder or on. rep1 lights up in the display when repeat play is set to track. you cannot select track when mode (music, image) is set to image (page 88). repeat play is canceled when: you remove the usb device. you turn of the system. you change the function. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb soundfadjustment adjusting the sound reinforcing the sound you can reinforce the bass and create a more powerful sound. press groove on the unit repeatedly. groove on* z-groove on* groove off groove on * fe volume switches to power mode and the equalizer curve changes. tip fe default setting is groove on. selecting the preset efect 1 press preset eq on the unit. fe last selected preset efect appears in the display. 2 press preset eq on the unit repeatedly to select the preset efect you want. preset efect options efect category rock pop jazz dance soul techno hip hop standard music sources mp3 eq mp3 audio tracks user eq 1, 2, 3 user equalizer setting (see to adjust the graphic equalizer and store the user equalizer setting (page 95)) flat original music source (cancels the preset efect) note effect on appears when preset eq on the unit is pressed repeatedly while groove or z-groove is turned on. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb sound adjustment continued to adjust the graphic equalizer and store the user equalizer setting you can adjust the sound by raising or lowering the level of specifc frequency band, then store up to three user equalizer setting, in the memory. 1 press eq band/memory on the unit repeatedly to select a frequency band. 2 turn operation dial on the unit clockwise or counterclockwise to adjust the level. frequency band equalizer level 3 repeat steps 1 and 2 to adjust the level of other frequency bands. 4 press enter on the unit. a user equalizer number fashes in the display. 5 turn operation dial on the unit clockwise or counterclockwise to select a user equalizer number (1 3) you want to store the equalizer setting. select exit to cancel storing. 6 press enter on the unit. fis setting is automatically stored as user eq. fe previous setting stored at this memory location is erased and replaced by the new setting. selecting the sound feld you can take advantage of the surround sound simply by selecting one of the sound felds. fey bring the exciting and powerful sound of movie theaters into your home. 1 press sound field . fe last selected sound feld appears in the display. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 9 gb 2 press / / / (or sound field ) repeatedly when the last selected sound feld appears in the display to select the sound feld you want. mhc-gzr9d/gzr8d: whenfthefheadphonesfarefnotf connected: sbsfmulti 1)) f (sound broad system multi mode) performs suitable decoding based on the source to maximize the sound feld efect. fis mode lets you enjoy audio playback of all types of discs from multiple speakers. a.f.d.fauto ) f (auto format direct auto) fe number of sound channels depends on the source. during dvd function, when 2 channel sources such as audio cd, video cd and mp3 audio tracks are played back, only 2 sound channels would be output. however, the number of sound channels output during dvd video and divx video fles playback would depend on the audio format selection. during other functions, the system would only output 2 sound channels. fis setting is ideal when you want to listen to the original sound from the source. proflogic ) performs pro logic decoding. fe source recorded in 2 channels is decoded into 4.1 channels. pliifmovie ) performs pro logic ii movie mode decoding. fis setting is ideal for movies encoded in dolby surround. in addition, this mode can reproduce sound in 5.1 channels when watching videos of overdubbed or old movies. fe source recorded in 2 channels is decoded into 5.1 channels. pliifmusic ) performs pro logic ii music mode decoding. fis setting is ideal for normal stereo sources such as audio cds. fe source recorded in 2 channels is decoded into 5.1 channels. v.m.dim. ) performs dcs (digital cinema sound) decoding. fe source recorded in 2 channels is decoded into 5.1 channels. link reproduces the surround channels from the front channels. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 97 gb sound adjustment chfstereo reproduces stereo output from multi channel sources such as dvd videos during dvd function. fe system outputs the original sound during functions other than dvd and during playback of stereo sources such as audio cd, video cd and mp3 audio tracks. whenfthefheadphonesfaref connected: hpfch fe normal sound feld for headphones. hpfvirtual ) fe sound feld for headphones with virtual surround efect. fis sound feld is only efective when you play back multi channel sources. 1) when playing a dvd, the efect is the same as a.f.d. auto. 2) fese sound felds cannot be selected when: the system is in standby for tape recording or during tape recording. a microphone is connected. the karaoke mode is turned on. mhc-gzr7d: whenfthefheadphonesfarefnotf connected: chfstereo reproduces stereo output from multi channel sources such as dvd videos during dvd function. fe system outputs the original sound during functions other than dvd and during playback of stereo sources such as audio cd, video cd and mp3 audio tracks. virtualfa* creates 3 sets of virtual surround speakers from the sound of the front speakers. fis sound feld is only efective when you play back multi channel sources. virtualfb* creates 1 set of virtual surround speakers from the sound of the front speakers without using actual surround speakers. fis mode is efective when the distance between the front speakers is short. fis sound feld is only efective when you play back multi channel sources. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 98 gb whenfthefheadphonesfaref connected: hpfch fe normal sound feld for headphones. hpfvirtual* fe sound feld for headphones with virtual surround efect. fis sound feld is only efective when you play back multi channel sources. * fese sound felds cannot be selected when: the system is in standby for tape recording or during tape recording. a microphone is connected. the karaoke mode is turned on. notes depending on the disc, the surround efect may not be as much as expected. for mhc-gzr9d/gzr8d, if none is selected in surround speaker setup, no sound will be output from the surround speakers even if link is selected. you cannot change the sound feld when transferring or recording to the usb device. singing along: karaoke you can enjoy karaoke by setting the system to karaoke mode. preparing for karaoke (dvd video, dvd-r/-rw in vr mode, video cd, mp3 audio tracks (including those on an usb device), and divx video fles only) 1 press function +/ repeatedly to select dvd or usb (or press dvd or usb on the unit). 2 turn mic level on the unit to min to reduce the microphone volume. 3 connect a microphone to mic jack on the unit. fe karaoke mode is turned on. karaoke mode: on appears on the tv screen and appears in the display. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 99 gb sound adjustment 4 start playing the music and adjust the volume. dvdfvideo,fdvd-r/-rwfinfvrf mode,fdivxfvideoffles: fe system outputs the audio format that you have selected. audiofcd,fvideofcd,fmp faudiof tracks: fe audio setting automatically changes to 1/l and the system outputs the lef channel audio. iffyoufwantftofhearfvocal: press audio repeatedly to select another audio channel. 5 start singing along with the music and adjust the microphone volume by turning mic level . to turn of the karaoke mode disconnect the microphone or press karaoke mode . karaoke mode: off appears on the tv screen. other operations to dofthis adjust the microphone volume turn mic level f on the unit. adjust the microphone echo turn echo level on the unit. cancel the echo efect turn echo level on the unit to min. notes fe sound input from the microphone is not output from the dvd digital out jack (mhc-gzr7d only). karaoke mode is automatically turned of when you: turn of the system. change the function (except for the dvd function or usb function). connect the headphones. if howling occurs: move the microphone away from the speakers. change the direction of the microphone. lower the mic level or echo level . press volume repeatedly (or turn master volume on the unit counterclockwise) . continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 100 gb dolby digital karaoke format (dvd video only) fe dolby digital format, which reproduces surround sound using 5 channels, can also contain the dolby digital karaoke format which is specialized for karaoke. in the dolby digital karaoke format discs, guide melody and guide vocal tracks are recorded in addition to the accompaniment. you can select them when karaoke mode is turned on. speakerfoutputfinfnormalfdolbyf digitalfformatf( fchannel) center front (l) front (r) surround (l) surround (r) speakerfoutputfinfdolbyfdigitalf karaokefformat center front (l) front (r) surround (l) surround (r) accompaniment accompaniment guide melody guide vocal 1 guide vocal 2 you can select any of these. you can check the audio information by pressing audio (page 41). when playing a dolby digital karaoke disc, appears at the current audio format. example: 2/0: recorded only with accompaniment. 3/0: recorded with guide melody. 3/1: recorded with guide melody and one guide vocal. 3/2: recorded with guide melody and two guide vocals. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 101 gb sound adjustment continued changing the key key control you can change the key to suit your vocal range, except when the system is in stop mode. press key control / to suit your vocal range in karaoke mode. you can adjust the key higher or lower in 13 steps ( 6 C 6). notes depending on the disc, you may not be able to change the key. fe key automatically returns to the original key when: you turn of the system. you change the function. you change the disc. the disc tray is opened. you stop playback. the title or track changes. you change the folder. the play item is changed during pbc playback. you perform lock search. you cancel karaoke mode. dvd layer is changed. playing karaoke with any stereo disc karaoke pon you can enjoy karaoke with a stereo- recorded disc, even if it is a non-karaoke disc, by reducing the sound of the vocals. press karaoke pon in karaoke mode. to cancel karaoke pon mode press karaoke pon again. notes fis function may not work well when: only a few instruments are playing. a duet is playing. the vocals on the disc deviate from the center. playing monaural-recorded discs (the accompaniment is also reduced). playing multiplex discs. during karaoke pon mode, the stereo efect is reduced. karaoke pon mode is automatically canceled when: you turn of the system. you change the function. you change the disc. you open the disc tray. you press audio . you set vocal select to other than off. you cancel karaoke mode. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 10 gb selecting the vocals vocal select (dvd video/ video cd/cd only) when playing a dvd with the dolby digital karaoke format in karaoke mode, you can turn on or of the guide vocal recorded in the karaoke track. when playing a video cd or audio cd in karaoke mode, you can listen to the vocals. you can also change the guide vocal channel. you can select diferent kinds of vocals. 1 press display in karaoke mode. fe control menu appears on the tv screen. 2 press or repeatedly to select (vocal select), then press enter . fe options for vocal select appear on the tv screen. 3 press or repeatedly to select the desired vocal channel. fe output channel changes as follows. fe default setting is underlined. whenfplayingfafdvdfvideo off : turns of the guide vocal. 1+2: guide vocal 1+2 1: guide vocal 1 2: guide vocal 2 whenfplayingfafvideofcdforf audiofcd off : turns of the guide vocal. l+r: fe same sound is output from both speakers. stereo: fe standard stereo sound whenfplayingfafsuperfvcd off : turns of the guide vocal. 1:l+r: fe same sound of the audio track 1 is output from both speakers. 1:stereo: fe stereo sound of the audio track 1 2:l+r: fe same sound of the audio track 2 is output from both speakers. 2:stereo: fe stereo sound of the audio track 2 www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 10 gb sound adjustment continued 4 press enter . notes when playing a dvd video, the function works only with the dolby digital karaoke format. depending on the disc, you may not be able to change the guide vocal channel. fe channel returns to the default setting when: you turn of the system. you change the function. you change the disc. you open the disc tray. you press audio . you cancel karaoke mode. you set karaoke pon mode to on. when playing a dvd video recorded only with one kind of guide vocal, select 1. selecting the scoring mode score mode when karaoke mode is turned on, you can use the scoring mode. your score is calculated by comparing your voice with the music source. 1 press display in karaoke mode. fe control menu appears on the tv screen. 2 press or repeatedly to select (score mode), then press enter . fe options for score mode appear on the tv screen. 3 press or repeatedly to select a setting. fe default setting is underlined. beginner 1 : beginner level. fe score updates every 3 seconds. beginner 2: beginner level. expert 1: advance level. fe score updates every 3 seconds. expert 2: advance level. demo: demonstration mode. fe score is displayed regardless of singing. 4 press enter . 5 start playing the music. 6 press score before singing a song in karaoke mode. fe previous highest score appears on the tv screen and the display changes as follows according to the level selected for score mode. : when you select beginner 1 or expert 1. : when you select beginner 2 or expert 2. : when you select demo. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 10 gb 7 after singing for more than a minute, press score again to view your score. your score is calculated from a scale of 0 to 99. your score is displayed for 5 seconds, during which time the system enters pause mode. afer your score, the ranking is displayed as follows: C fe ranking is displayed as a list with top 3 scores. C your score and ranking for the last song fash. C if you are in the top 10, your ranking is displayed. if not, 10+ is displayed. C if your score is 0, your score is not displayed in the ranking list. notes fe highest score is reset when the system is turned of. fe score mode function may be canceled when certain remote buttons are pressed. in some cases, you may not be able to use the scoring mode. tip fe score mode setting is automatically changed to beginner 1 when the system is turned of. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 10 gb other operations otherfoperations using the timer falling asleep to music sleep timer you can set the system to turn of afer a certain time, so that you can fall asleep to music. press sleep repeatedly to select the time you want. setting the timer play timer/rec timer you cannot activate both the play timer and the rec timer at the same time. make sure you have set the clock (see setting the clock (page 33)). playftimer you can wake up to music at a preset time. recftimer you can record from a preset radio station at a specifed time. 1 prepare the sound source. forfplayftimer: you can select one of the following music sources. disc: load a disc. usb: connect an usb device. tape: load a tape with the side you want to play facing forward. tuner: tune in the preset station you want. fen press volume +/ (or turn master volume on the unit) to adjust the volume. fforfrecftimer: tune in the preset radio station you want. 2 press timer menu . 3 press or repeatedly to select play set or rec set, then press enter . on appears and the hour indication fashes in the display. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 10 gb 4 set the time to start playback or recording. press or repeatedly to set the hour, then press enter . fe minute indication fashes in the display. use the procedure above to set the minute. off appears and the hour indication fashes in the display. 5 set the time to stop playback or recording using the same procedure as step 4. 6 select the sound source or prepare the tape or usb device. forfplayftimer: press or repeatedly until the music source (dvd, usb, tape or tuner) you want appears in the display, then press enter . fe display will show the timer settings. forfrecftimer: fe display will show the timer settings. when recording to a tape, perform steps 1 through 5 of recording onto a tape (page 75). when you record on both sides, be sure to start from the front side. if you start from the reverse side, recording stops at the end of reverse side. when recording to an usb device, perform steps 1 and 2 of listening to music of an usb device (page 85). 7 press to turn of the system. be sure to turn of the system at least 120 seconds before the preset time. other operations to dofthis check the setting 1 press timer menu . timer select fashes in the display. 2 press enter . 3 press or repeatedly to select play select or rec select, then press enter . change the setting start from step 1. cancel the play timer or rec timer 1 press timer menu . timer select fashes in the display. 2 press enter . 3 press or repeatedly to select timer off, then press enter . www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 107 gb other operations notes if you use the play timer or rec timer and the sleep timer at the same time, the sleep timer has priority. fe play timer and rec timer will not be activated if the system is turned on or if standby fashes in the display. fe volume is reduced to minimum during rec timer. when you set the rec timer, the system turns on 90 seconds before the preset time. when you set the play timer, the system turns on 30 seconds before the preset time. do not operate the system from the time the system turns on until the play or recording starts. tip you can perform the timer settings by using options , operation dial and enter on the unit. changing the display turning of the display power saving mode fe demonstration display and the clock display can be turned of to minimize the amount of power consumed during standby mode (power saving mode). press display repeatedly while the system is turned of. demonstration 1) no display (power saving mode) clock 2) demonstration 1) fe display changes and the indicators fash even when the system is turned of. 2) fe clock display automatically turns to power saving mode afer 8 seconds. note you cannot perform the following operations during power saving mode: setting the clock (page 33). changing the am tuning interval (except for russian and saudi arabian models) (page 72). changing the color system (except for russian and latin american models) (page 27). continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 108 gb changing the power illuminator press illumination on the unit repeatedly to change the illumination pattern around master volume on the unit. each time you press the button, the display changes as follows: pattern 1 pattern 2 pattern 3 pattern off pattern 1 viewing information about the disc viewing information about the disc in the front panel display press display . each time you press display , the display changes from disc information clock display (for 8 seconds) effect name (for 4 seconds) checking the elapsed playing time, remaining time and titles press time/text during playback. each time you press time/text , the display changes from whenfplayingfafdvdfvideoforfdvd- r/-rwfinfvrfmode: when the menu or the title without a chapter is played back elapsed playing time of the menu or the current title disc title 1) www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 109 gb other operations when a chapter other than above condition is played back elapsed playing time of the current title remaining time of the current title elapsed playing time of the current chapter remaining time of the current chapter disc title 1)2) whenfplayingfanfaudiofcdforfvideof cdfwithoutfpbcffunction: elapsed playing time of the current track remaining time of the current track elapsed playing time of the disc 3) remaining time of the disc 3) track name 1)4) whenfplayingfafvideofcdfwithfpbcf function: elapsed playing time of the current scene disc title 1)4) whenfplayingfmp faudioftracksforf divxfvideofflesfonfafdatafcd/dvd: elapsed playing time of the current track/fle track/fle name 5)6) checking the total playing time and titles press time/text repeatedly when playback is stopped. each time you press time/text , the display changes from dvdfvideoforfdvd-r/-rwfinfvrf mode: total number of titles on the disc disc title 1) audiofcdforfvideofcdfwithoutfpbcf playback: total number of the tracks on the disc and the total playing time of the disc disc title 1) videofcdfwithfpbcfplayback: total number of scenes on the disc disc title 1)4) 1) no text appears in the display if the dvd video is not a dvd-text disc, the audio cd is not a cd-text disc or the video cd does not have text information. 2) fe current chapter number and the current title number are displayed for 2 seconds before the display returns to the elapsed playing time. 3) when program play or shufe play is turned on, the elapsed playing time and the remaining time of the disc would be skipped. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 110 gb 4) fe current track number and the current index number (for a disc without pbc) or the current scene number (for a disc with pbc) are displayed for 2 seconds before the display returns to the elapsed playing time. 5) when playing divx video fles, the current folder number and the current fle number are displayed for 2 seconds before the display returns to elapsed playing time when you press time/text during display of title of the fle. 6) if an mp3 audio track has the id3 tag, the system will display an album name or title name from the id3 tag information. fe system supports id3 ver 1.0/1.1/2.2/2.3. id3 ver 2.2/2.3 tag information display has priority when both id3 ver 1.0/1.1 and ver 2.2/2.3 tags are used for a single mp3 audio track. notes if you play back a disc containing jpeg image fles only, jpeg or no audio appears in the display. you cannot use time/text to change the display of disc information when: a jpeg image fle is played back. playback is stopped for data cd/dvd with mp3 audio tracks and/or jpeg image fles. playback is stopped for data cd/dvd with divx video fles. if the mp3 audio track title contains characters which cannot be displayed, these characters will be displayed as _ . fe elapsed playing time of mp3 audio tracks and divx video fles may not be displayed correctly. viewing information about the disc in the on-screen display press time/text . each time you press time/text while playing the disc, the display changes from fe time display that you can view on the tv screen depends on the disc you are playing. t: title or track c: chapter d: disc bit rate time information folder name* track/fle name* * if an mp3 audio track has the id3 tag, the system will display an album name or title name from the id3 tag information. fe system supports id3 ver 1.0/1.1/2.2/2.3. id3 ver 2.2/2.3 tag information display has priority when both id3 ver 1.0/1.1 and ver 2.2/2.3 tags are used for a single mp3 audio track. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 111 gb other operations note fe control menu display will show diferent items depending on the disc type. whenfplayingfafdvdfvideoforfdvd- r/-rwfinfvrfmode: elapsed playing time of the current title remaining time of the current title elapsed playing time of the current chapter remaining time of the current chapter elapsed playing time of the current title and disc title whenfplayingfafvideofcdfwithfpbcf function: elapsed playing time of the current scene disc title whenfplayingfanfaudiofcdforfvideof cdfwithoutfpbcffunction: elapsed playing time of the current track remaining time of the current track elapsed playing time of the disc remaining time of the disc elapsed playing time of the current track and track name whenfplayingfmp faudioftracksforf divxfvideofflesfonfafdatafcd/dvd: elapsed playing time of the current track/ fle and folder/track/fle name* * if an mp3 audio track has the id3 tag, the system will display an album name or title name from the id3 tag information. fe system supports id3 ver 1.0/1.1/2.2/2.3. id3 ver 2.2/2.3 tag information display has priority when both id3 ver 1.0/1.1 and ver 2.2/2.3 tags are used for a single mp3 audio track. notes only alphabet letters, numbers and some symbols can be displayed. depending on the disc, the system can only display a limited number of characters. for mp3 audio tracks with format other than iso 9660 level 1 and level 2, folder name and track name may not be displayed. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 11 gb displaying the audio information of the disc (dvd video and divx video fles only) when you press audio repeatedly during playback, the format of the current audio signal is displayed on the tv screen. whenfplayingfafdvdfvideo: for example, in dolby digital format, multiple signals ranging from monaural to 5.1 channel signals can be recorded on a dvd video. example: for dolby digital 5.1 channel: 2 surround components 2 front components + 1 center component 1 lfe (low frequency efect) component whenfplayingfafdivxfvideoffle: example: mp3 audio track bit rate checking the date information of jpeg image fles you can check the date information during playback when exif * tag is recorded in the jpeg image fles. press display repeatedly during playback. fe control menu appears. data cd jpeg 1 0 ( 1 5 ) 5 ( 8 ) 1 8 / 9 / 2 0 0 2 date information * exchangeable image file format is a digital camera image format defned by the japan electronics & information technology industries association (jeita). note fe date information format varies depending on the area. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 11 gb other operations hooking up optional components to enhance your system, you can connect optional components. refer to the operating instructions provided with each component. rearfpanel mhc-gzr9d MHC-GZR8D mhc-gzr7d continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 11 gb video/sat audio in l/r jacks connect the audio output jacks of an optional component (such as vcr or satellite tuner). video/sat video in jack connect the video output jack of an optional component (such as vcr or satellite tuner). component video out jacks connect the component video input jacks of the tv or projector. if your tv accept progressive format signals, you must use this connection and set progressive (component out) to on (page 28). you can enjoy higher quality video images. note you cannot output the video signal from the video/sat video in jack through the component video out jacks of this unit. video out jack connect the video input jack of the tv or projector. s video out jack connect the s video input jack of the tv or projector. you can enjoy higher quality video images when you select the s video. note you cannot output the video signal from the video/sat video in jack through the s video out jack of this unit. dmport (digital media port) connect the digital media port adapter (not supplied). you need to connect the digital media port adapter to an optional audio device (portable audio player, etc.). notes available digital media port adapters vary in each area. do not connect an adapter other than the digital media port adapter. do not connect or disconnect the digital media port adapter to/from the dmport while the system is on. when using a digital media port adapter (not supplied) that has video output function, connect the adapter directly to the tv. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 11 gb other operations d-light sync out jack (except for russian and australian models) connect the d-light sync controller (not supplied). you need to connect the d-light sync controller to the lighting device* (not supplied). fe lighting device will react according to control signals transmitted by the d-light sync controller upon receiving music source from the system. for details on the use of d-light sync controller and lighting device, refer to the respective operating instructions supplied with the respective device. * refer to the d-light sync controller operating instruction for the recommended lighting device. note fe lighting efect may be diferent depending on the connected lighting device or the type of music being played back. subwoofer out jack (mhc- gzr8d/gzr7d only) connect the audio input jack of an optional subwoofer*. * sa-gnv111d is recommended. in some areas, the sa-gnv111d may not yet be available. note fe efect may be limited or noise may occur depending on the connected subwoofer or the type of music being played back. dvd digital out jack (mhc- gzr7d only) connect the digital optical input jack of an optional digital component (such as amplifer). you can enjoy 5.1 channel sound, if the connected amplifer equipped with dolby digital or dts decoder. notes sound is output only when the system function is set to dvd or usb. if you press audio , sound field or the buttons related to karaoke mode, or if you connect or disconnect microphones or headphones, the sound cuts of for a moment. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 11 gb listening to a connected vcr or satellite tuner 1 press function +/ repeatedly (or press video/sat on the unit) to select video or sat. 2 start playing the connected component. to switch between the video and sat function hold down video/sat on the unit and press options on the unit while the system is on. fe system switches the function from video to sat or vice versa. note if the sound is distorted or too loud when video is selected, change the function to sat. using the digital media port adapter 1 press function +/ repeatedly (or press dmport on the unit) to select dmport. 2 start playing the connected component. fe sound from the connected component is played on the system. for operation details, see the operating instructions of the digital media port adapter (not supplied). note depending on the type of digital media port adapter (not supplied), you may be able to operate the connected component using either the buttons on the remote or the unit. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 117 gb other operations enjoying the multi channel sound with the optional amplifer (mhc-gzr7d only) 1 connect the digital optical cord. see hooking up optional components (page 113). 2 connect the speakers (not supplied) to an optional amplifer equipped with a decoder. for the speakers placement, refer to the operating instructions supplied with the connected amplifer. 3 start playing a multi channel source, such as a dvd video. 4 select the audio format you want. see changing the sound (page 41). www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 118 gb additionalfinformation troubleshooting should you encounter a problem with your system, do the following: 1 make sure the power cord and speaker cords are connected correctly and frmly. 2 find your problem in the troubleshooting checklist below and take the indicated corrective action. if the problem persists afer doing all of the above, consult your nearest sony dealer. if the standby indicator fashes immediately unplug the power cord, and check the following items. if your system has a voltage selector, is the voltage selector set to the correct voltage? are you using only the supplied speakers? are the + and speaker cords short-circuited? is anything blocking the ventilation holes on the rear of the system? afer the standby indicator stops fashing, reconnect the power cord, and turn on the system. if the issue persists, contact your nearest sony dealer. general thefdisplayfstartsffashingfasfsoonf asfyoufplugfinfthefpowerfcordfevenf thoughfyoufhavefnotfturnedfonfthef system. press display once while the system is of. fe demonstration disappears. CfC:CfCfappearsfinfthefdisplay. a power failure has occurred. set the clock (page 33) and timer settings (page 105) again. thefsystemfdoesfnotfturnfon. is the power cord plugged in? is the voltage selector set correctly to match the local power line voltage? (for models with a voltage selector only) thefclockforftimerfsettingfisfcanceled. fe power cord is disconnected or a power failure occurred. redo setting the clock (page 33). if you have set the timer, redo using the timer (page 105). therefisfnofsound. press volume + repeatedly (or turn master volume on the unit clockwise) . fe headphones are connected to the phones jack . www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 119 gb additional information continued check the speaker connections (page 23). fere is no audio output during rec timer. fe system is in pause mode, in slow- motion play or in lock search. press (or ? on the unit) to start the playback. no sound is output when transferring music to the usb device. therefisfnofmicrophonefsound. press volume + repeatedly (or turn master volume on the unit clockwise) or turn mic level on the unit clockwise to adjust the microphone volume. make sure the microphone is connected to the mic jack correctly. make sure the microphone is turned on. therefisfseverefhumforfnoise. a tv or vcr is placed too close to the unit. move the unit away from the tv or vcr. move the unit away from the source of noise. connect the unit to a diferent wall outlet. install a noise flter (commercially available) to the power cord. theftimerfdoesfnotffunction. check the timer setting and set the correct time (page 105). cancel the sleep timer function. thefremotefdoesfnotffunction. remove the obstacles between the remote and the unit. move the remote closer to the unit. point the remote at the units sensor. replace the batteries (r6/size aa). locate the unit away from the fuorescent light. therefisfacousticffeedback. reduce the volume. move the microphone away from the speakers or change the direction of the microphone. thefcolorfirregularityfonfaftvfscreenf persists. turn of the tv set once, then turn it on afer 15 to 30 minutes. if the color irregularity still persists, place the speakers farther away from the tv set. thefsoundffromfthefcomponentf connectedftofthefvideo/satfaudiof infl/rfjacksfisfdistorted. if video appears in the display when you press video/sat on the unit, switch the display to sat (see to switch between the video and sat function (page 116)). theatrefsyncffunctionfdoesfnotf work. if distance between the tv and this unit is too far, this function may not work. install the unit near the tv. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 10 gb speakers soundfcomesffromfonefchannelforf unbalancedfleftfandfrightfvolume. place the speakers as symmetrically as possible. check that the speakers are connected securely and correctly. fe source being played back is monaural. soundflacksfbass. check that the speakers + and terminals are connected correctly. thefsoundfcomesffromfthefcenterf speakerfonlyf(mhc-gzr9d/gzr8df only). depending on the disc, the sound may come from the center speaker only. therefisfnofsoundffromfthef subwoofer. make sure that subwoofer setting is set to yes. set the subwoofer level to the appropriate level. no sound is produced from the subwoofer when you play back a dvd video that does not have subwoofer output recorded. check that the subwoofer is connected securely and correctly. for mhc-gzr9d, check that the subwoofer indicator on the unit is lit. therefisfnofsoundffromfthefcenter/ surroundfspeakerf(mhc-gzr9d/ gzr8dfonly). set the center/surround speaker level to the appropriate level. fe sofware being played back has limited sound efects. check the volume with the test tone (page 70). check that the center/surround speakers are connected securely and correctly. make sure that surround is set to side or behind. make sure that center is set to yes. disc player thefdiscfdoesfnotfejectfandflockedf appearsfinfthefdisplay. consult your nearest sony dealer or local authorized sony service facility. thefdiscftrayf fdoesfnotfclose. load the disc correctly. always close the disc tray by pressing open/close on the unit. do not forcibly push the disc tray to close it as this may cause a malfunction. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 11 gb additional information thefdiscfdoesfnotfeject. you cannot eject the disc when performing cd synchro recording or when transferring music from a disc. press to cancel the operation, then press open/close on the unit to eject the disc. consult your nearest sony dealer. playbackfdoesfnotfstart. check whether a disc is loaded. wipe the disc clean (page 133). reload the disc. load the disc that this system can play back (page 7). load the disc on the disc tray with the label side facing up. remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates. press (or ? on the unit) to start playback. fe region code on the dvd video does not match the system. thefsoundfskips. wipe the disc clean (page 133). reload the disc. move the unit to a place without vibration (e.g., on top of a stable stand). move the speakers away from the unit, or place them on separate stands. when you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip. playbackfdoesfnotfstartffromftheffrstf track. shufe play mode, program play mode or repeat play mode is selected. resume play has been selected. press twice. fen, press (or ? on the unit) to start playback (page 43). fe title of dvd video or pbc menu automatically appears on the tv screen. playbackfstartsfautomatically. fe dvd video features an auto playback function. playbackfstopsfautomatically. some discs may contain an auto pause signal. while playing such a disc, the playback stops at auto pause signal. youfcannotfperformfsomeffunctionsf suchfasfstop,flockfsearch,fslow- motionfplay,frepeatfplay,fshufefplayf orfprogramfplay. depending on the disc, you may not be able to do some of the operations above. refer to the operating instructions supplied with the disc. thefdatafcd/dvdf(mp faudiof track/jpegfimageffle/divxfvideoffle)f cannotfbefplayedfback. fe data cd is not recorded in a format that conforms to iso 9660 level 1, level 2, or joliet (expansion format). continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb fe data dvd is not recorded in a format that conforms to udf (universal disk format). fe mp3 audio track does not have the extension .mp3. fe data is not stored in the desired format. fe mp3 audio tracks in format other than mpeg 1 audio layer 3 cannot be played back. fe system can play back to a depth of 8 folders only. for mp3 audio tracks/jpeg image fles, check the mode (music, image) setting (page 55). fe disc contains more than 200 folders. fe folder contains more than 150 tracks/fles. fe jpeg image fle does not have the extension .jpg or .jpeg. fe jpeg image fle is larger than 3,072 (width) 2,048 (height) in normal mode, or more than 2,000,000 pixels in progressive jpeg mode which is mainly used on the internet website. jpeg image fles with a high width to length ratio cannot be played back. for mp3 audio tracks and jpeg image fles, the data cd/dvd contains a divx video fle. fe divx video fle does not have the extension .avi or .divx. fe divx video fle is larger than 720 (width) 576 (height). thefmp faudioftracksftakeflongerf timeftofplayfbackfthanfothers. afer the system reads all the tracks on the disc, playback may take more time than usual if: the number of folders or tracks on the disc is very large. the folder and track organization structure is very complex. dataferrorfappearsfonftheftvf screenfwhenfplayingfafdatafcd/dvd. fe mp3 audio track/jpeg image fle you want to play is broken. fe data is not mpeg 1 audio layer 3 data. fe jpeg image fle format does not conform to dcf. fe jpeg image fle has the extension .jpg or .jpeg, but is not in jpeg format. fe divx video fle has the extension .avi or .divx, but is not in divx format. fe divx video fle does not conform to a divx certifed profle. thefdiscftitle,fcd-textfandfdvd-textf charactersfdofnotfappearfproperly. use a disc that conforms to the iso 9660 level 1, level 2, or joliet (expansion). fe character code that can be displayed by this system are as follows: upper cases (a to z) numbers (0 to 9) symbols (< > * +, ? / [ ] \ _) other characters appear as _ . www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb additional information thefsurroundfefectfisfdifcultftofhearf whenfyoufarefplayingfafdolbyfdigitalf orfmpegfaudiofsoundftrack. make sure the sound feld is set properly (page 95). check the speaker connection (page 23). depending on the dvd video, the output signal may not be the entire 5.1 channel. it may be monaural or stereo, even if the sound track is recorded in dolby digital or mpeg audio format. thefsoundflosesfstereofefectfwhenf youfplayfbackfafdvdfvideo,fvideof cd,faudiofcd,fmp faudioftrackforf divxfvideoffle. unplug the microphone or press karaoke mode repeatedly until disappears from the display. make sure the system is connected properly. check the speaker connection (page 23). usb device youfcannotfstartftransferringforf recordingftofanfusbfdevice. fe following problems may have occurred. fe usb device is full. fe number of tracks and folders on the usb device has reached the upper limit. fe usb device is write-protected. transferringforfrecordingfisfstoppedf beforefitfisffnished. you are using an unsupported usb device. refer to compatible usb devices (supplement) for the supported device types. fe usb device is not formatted correctly. refer to the operating instructions supplied with the usb device for how to format. turn of the system and remove the usb device. if the usb device has a power switch, turn the usb device of and then on again afer removing it from the system. fen perform transferring again. if the transfer, recording and erase operations are repeated multiple times, the fle structure within the usb device becomes fragmented. refer to the operating instructions supplied with the usb device for how to deal with this problem. if the problem persists, contact your nearest sony dealer. transferringforfrecordingfresultsfinf anferror. you are using an unsupported usb device. refer to compatible usb devices (supplement) for the supported device types. turn of the system and remove the usb device. if the usb device has a power switch, turn the usb device of and then on again afer removing it from the system. fen perform transferring again. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb fe usb device was disconnected or the power was turned of during the transfer process. delete the partially- transferred track or partially-recorded track, and perform transferring or recording again. if this does not fx the problem, the usb device may be broken. refer to the operating instructions supplied with the usb device for how to deal with this problem. if the problem persists, contact your nearest sony dealer. tracksforffoldersfonfthefusbfdevicef cannotfbeferased. check if the usb device is writeprotected. fe usb device was disconnected or the power was turned of during the erase operation. delete the partially- erased track. if this does not fx the problem, the usb device may be broken. refer to the operating instructions supplied with the usb device for how to deal with this problem. if the problem persists, contact your nearest sony dealer. arefyoufusingfafsupportedfusbf device? if you connect an unsupported usb device, the following problems may occur. refer to compatible usb devices (supplement) for the supported device types. fe usb device is not recognized. track, fle or folder names are not displayed on this system. playback is not possible. fe sound skips. fere is noise. a distorted sound is output. transferring or recording stops before it is fnished. overfcurrentfappears. a problem has been detected with the level of electrical current from the (usb) port . turn of the system and remove the usb device from the (usb) port . make sure there is no problem with the usb device. if this display pattern persists, contact your nearest sony dealer. therefisfnofsound. fe usb device is not connected correctly. turn of the system and reconnect the usb device, then turn on the system and check if usb memory lights up. therefisfnoise,fskipping,forfdistortedf sound. turn of the system, then reconnect the usb device. fe music data itself contains noise, or the sound is distorted. noise may have entered during the transfer process or recording. delete the track, and try transferring or recording again. fe bit rate used when encoding audio fles was low. send audio fles with higher bit rate to the usb device. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb additional information thefusbfdevicefcannotfbefconnectedf intofthef f(usb)fportf . fe usb device is being connected backwards. connect the usb device in the correct orientation. readingfisfdisplayedfforfanf extendedftime,forfitftakesfaflongftimef beforefplaybackfstarts. fe reading process can take a long time in the following cases. fere are many folders, tracks or fles on the usb device. fe fle structure is extremely complex. fe memory capacity is excessive. fe fle size is extremely large. fe internal memory is fragmented. fus, we recommend following these guidelines. total folders on usb device: 200 or less total tracks or fles per folder: 150 or less erroneousfdisplay send the music data to the usb device again, as the data stored in the usb device may have been corrupted. fe character code that can be displayed by this system are as follows: upper cases (a to z) numbers (0 to 9) symbols (< > * +, ? / [ ] \ _) other characters appear as _. thefusbfdevicefisfnotfrecognized. turn of the system and reconnect the usb device, then turn on the system. connect the supported usb device (refer to compatible usb devices (supplement)). fe usb device does not work properly. refer to the operating instructions supplied with the usb device for how to deal with this problem. if the problem persists, contact your nearest sony dealer. dataferrorfappearsfonfthefdisplayf whenfplayingfanfusbfdevice. fe audio track/jpeg image fle you want to play is broken. fe jpeg image fle format does not conform to dcf. fe jpeg image fle has the extension .jpg or .jpeg, but is not in jpeg format. playfdoesfnotfstart. turn of the system and reconnect the usb device, then turn on the system. connect the supported usb device (refer to compatible usb devices (supplement)). press (or ? on the unit) to start play. playfdoesfnotfstartffromftheffrstf track. set the play mode to normal play mode. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb tracksforfflesfcannotfbefplayedfback. fe mp3 audio track does not have the extension .mp3. fe wma audio track does not have the extension .wma. fe aac audio track does not have the extension .m4a. fe audio track is not stored in mp3/ wma/aac format. fe jpeg image fle does not have the extension .jpg or .jpeg. fe jpeg image fle is larger than 3,072 (width) 2,048 (height) in normal mode, or more than 2,000,000 pixels in progressive jpeg mode which is mainly used on the internet website. jpeg image fles with a high width to length ratio cannot be played back. check the mode (music, image) setting (page 87, 88). usb device formatted with fle systems other than fat12, fat16 or fat32 are unsupported.* fe mp3 audio tracks in format other than mpeg 1 audio layer 3 cannot be played back. a wma audio track that is the wma drm, wma lossless, or wma pro format cannot be played back. an aac audio track that is the aac drm or aac lossless format cannot be played back. aac audio tracks encoded at 96 khz cannot be played back. if you use a partitioned usb device, only tracks or fles on the frst partition can be played. fe system can play back to a depth of 8 folders only. fe number of folders has exceeded 200. fe number of tracks or fles has exceeded 150. tracks or fles that are encrypted or protected by passwords, etc. cannot be played back. * fis system supports fat12, fat16 and fat32, but some usb devices may not support all of these fat. for details, see the operating instructions of each usb device or contact the manufacturer. picture therefisfnofpicture. fe video/sat function is selected, but there is no input signal. check that the system is connected securely. fe video cord is damaged. replace it with a new one. make sure you connect the unit to the video input jack of your tv (page 26). make sure you turn on the tv and operate the tv correctly. make sure you select the video input on the tv so that you can view the pictures from the system. make sure you set the color system correctly, according to your tvs color system (except for russian and latin american models). make sure you connect the unit and your tv using only the supplied video cord. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 17 gb additional information set progressive (component out) to off if you connect your tv to the component video out jacks and your tv cannot accept progressive signal. you have set to progressive format but your tv cannot accept the signal in progressive format. in this case, connect the video out jack or the s-video out jack to the tv and set to the interlace format (page 28). even if your tv is compatible with progressive format (525p/625p) signals, the image may be afected when you set to progressive format. in this case, set to interlace format (the default setting) (page 28). picturefnoisefappears. wipe the disc clean (page 133). if video signal from your system has to go through your vcr to your tv, the copy-protection applied to some dvd video programs could afect the picture quality. if you still experience problems afer checking your connections, connect your system directly to your tvs s video input (page 27, 114). keep the speaker cords away from the antennas. when you play back a video cd recorded in a diferent color system from the one you set to the system, the picture image may be distorted (except for russian and latin american models) (page 27, 66). when you connect your tv to the component video out jacks and play back video-based sofware in progressive signal format, some sections of the image may appear unnatural due to the conversion process. set the color system to match your tv (except for russian and latin american models) (page 27, 66). thefaspectfratiofofftheftvfscreenf cannotfbefchangedfevenfthoughf youfcanfsetftvftypefunderfvideof setupfinfthefsetupfmenufwhenfyouf playfbackfafwidefpicture. fe aspect ratio is fxed on your dvd video. if you connect the unit with the s video cord, connect directly to the tv. otherwise, you may not change the aspect ratio. depending on the tv, you may not change the aspect ratio. messagesfdofnotfappearfonftheftvf screenfinftheflanguagefyoufwant. select the language you want for the on-screen display in osd under language setup in the setup menu (page 64). theflanguagefforfthefsoundftrackf cannotfbefchanged. multilingual tracks are not recorded on the dvd video being played back. fe dvd video prohibits changing the language for the sound track. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 18 gb thefsubtitlesflanguagefcannotfbef changed. multilingual subtitles are not recorded on the dvd video being played back. fe dvd video prohibits changing the subtitles. thefsubtitlesfcannotfbefturnedfof. fe dvd video prohibits turning of subtitles. thefanglesfcannotfbefchanged. multi-angles are not recorded on the dvd video being played back. fe dvd video prohibits changing the angles. tuner thefradiofpresettingfisfcanceled. fe power cord is disconnected or a power failure occurred for longer than a day. redo listening to a preset radio station (page 71). therefisfseverefhumforfnoise.f (tunedforfstereoffashesfinfthef display) set the proper band and frequency (page 71). connect the antenna properly (page 23). find a place and an orientation that provide good reception, then set up the antenna again. if you cannot obtain good reception, we recommend that you connect a commercially available external antenna. fe supplied fm lead antenna receives signals along its entire length, so make sure you extend it fully. locate the antennas as far away from the speaker cords and the power cord as possible, to avoid picking up noise. try turning of the surrounding electrical equipment. afstereoffmfprogramfcannotfbef receivedfinfstereo. press repeat/fm mode repeatedly until mono disappears from the display. tape deck theftapefdoesfnotfrecordforf playback,forftherefisfafdecreasefinf soundflevel. fe tape heads are dirty (see cleaning the tape heads (page 134)). fe record/playback heads are magnetized (see demagnetizing the tape heads (page 134)). theftapefdoesfnotferasefcompletely. fe record/playback heads are magnetized (see demagnetizing the tape heads (page 134)). therefisfexcessivefwowforffutter,forf thefsoundfdropsfout. fe capstans or pinch rollers are dirty (see cleaning the tape heads (page 134)). www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 19 gb additional information noisefincreasesforfthefhighf frequenciesfareferased. fe record/playback heads are magnetized (see demagnetizing the tape heads (page 134)). theftapefdoesfnotfrecord. no tape is loaded. load a tape. fe tab has been removed from the tape. cover the broken tab with adhesive tape (page 134). fe tape has reeled to the end. optional components therefisfnofsound. refer to general item fere is no sound. (page 118) and check the condition of the system. connect the component properly (page 113) while checking: if the cords are connected properly. if the cord plugs are frmly inserted all the way. turn on the connected component. refer to the operating instructions supplied with the connected component and start playing. if the system still does not operate properly after performing the above measures or other troubles not described above occur, reset the system as follows: use buttons on the unit to reset the system to its factory default settings. 1 unplug the power cord. 2 plug the power cord back in. 3 press to turn on the system. 4 while holding down enter , press illumination and press at the same time. cold reset appears in the display. fe system is reset to the factory settings except for the setup settings. you should set the settings you made, such as the preset stations, clock and timer. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 10 gb to return the setup settings to the default settings*, perform reset as follows: 1 press display when playback is stopped. fe control menu appears on the tv screen. 2 press or repeatedly to select (setup), then press enter . 3 press or repeatedly to select custom, then press enter . fe setup menu appears. 4 press or repeatedly to select system setup, then press enter . 5 press or repeatedly to select reset, then press enter . 6 press or repeatedly to select yes, then press enter . it takes a few seconds to complete. do not press when resetting the system. * except for parental control settings self-diagnosis function (when letters/numbers appear in the display) when the self-diagnosis function is activated to prevent the system from malfunctioning, a 5-character service number (e.g. c 13 50) with a combination of a letter and 4 digits appears on the tv screen or the front panel display. in this case, check the following table. firstf f charactersfoff thefservicef number causefandfcorrectivef action c 13 fis disc is dirty. clean the disc with a sof cloth (page 133). c 31 fe disc is not inserted correctly. restart the system, then re-insert the disc correctly. e xx (xx is a number) to prevent a malfunction, the system has performed the self-diagnosis function. contact your nearest sony dealer or local authorized sony service facility and give the 5-character service number. example: e 61 10 www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 11 gb additional information when displaying the version number on the tv screen when you turn on the system, the version number [ver.x.xx] (x is a number) may appear on the tv screen. although this is not a malfunction and for sony service use only, normal system operation will not be possible. turn of the system, and then turn on the system again to operate. messages one of the following messages may appear or fash in the front panel display during operation. cannotfplay a disc that cannot be played back was inserted. a dvd video with unsupported region code was inserted. dataferrorf(forfusbfdevices) you tried to play a track that is not playable. dataferrorf(forfdatafcd/dvds) fe mp3 audio track, jpeg image fle and divx video fle you want to play back is damaged. fe mp3 audio track does not conform to mpeg 1 audio layer 3 format. fe jpeg image fle does not conform to dcf format. fe mp3 audio track has the extension .mp3 but it is not in mp3 format. fe jpeg image fle has the extension .jpg or .jpeg but it is not in jpeg format. fe divx video fle does not conform to a divx certifed profles. fe divx video fle has the extension .avi or .divx but it is not in divx format. deviceferror fe usb device could not be recognized or an unknown device is connected. deviceffull fe usb device is full. dvdfnofdisc fere is no disc on the disc tray . continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb eraseferror erase of audio tracks or folders on the usb device failed. fatalferror fe usb device has been disconnected while transferring to the usb device. folderffull fe number of folders on the usb device has reached the maximum. invalid you have pressed an invalid button. jpeg fe playback mode is image and a jpeg image fle is being played back. nofaudio fe connected usb device or the loaded data cd/dvd does not contain audio tracks. nofdevice no usb device is connected. nofimage fe connected usb device or the loaded data cd/dvd does not contain image fles. noftab you cannot record the tape because the tab has been removed from the tape. noftape fere is no tape in the tape deck. notfinfuse you have pressed a button whose operation is not allowed or invalid at that time. notfsupport an unsupported usb device is connected. fe usb device is connected to this system through a hub. offftimefng fe on time and of time of play timer or rec timer is the same. overfcurrent an over current from the (usb) port was detected. pleasefwait fe system is doing initialization process. fe system is readying for usage of an usb device. protected fe usb device is write-protected. pushfstop you have pressed the buttons whose operation is only possible when playback is stopped. reading fe system is reading information of the disc. some buttons are not available. fe system is recognizing the usb device. recferror transferring did not start, stopped partway, or otherwise could not be performed. trackffull fe number of audio tracks on the usb device has reached the maximum. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb additional information precautions notesfonfdiscs before playing, wipe the disc with a cleaning cloth from the center out to the edge. do not clean discs with solvents, such as benzine, thinner, or commercially available cleaners or anti-static spray intended for vinyl lps. do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. onfcleaningfdiscs,fdisc/lensfcleaner do not use a commercially available cleaning disc or disc/lens cleaner (wet or spray type). fese may cause apparatus to malfunction. onfoperatingfvoltage before operating the system, check that the operating voltage of the unit is identical with the voltage of your local power supply. onfsafety completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. when unplugging the unit, always grip the plug. never pull the cord itself. should any solid object or liquid get into the system, unplug the system, and have it checked by qualifed personnel before operating it again. onfplacement do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. if the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the dvd player, and cause the system to malfunction. in this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates. onfheatfbuildup heat buildup on the unit during operation is normal and is not cause for alarm. do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. do not obstruct the ventilation holes. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb infcasefcolorfirregularityfisfobservedf onfafnearbyftvfscreen with the magnetically shielded type of speakers, the speakers can be installed near a tv set. however, color irregularity may still be observed on the tv screen depending on the type of your tv set. in this situation, turn of the tv, wait 15 to 30 minutes, and turn it back on. if there is no improvement, move the speakers far away from the tv. importantfnotice caution: if you leave a still video image or on-screen display image displayed on your tv for an extended period of time via this system, you risk permanent damage to your tv screen. projection tvs are especially susceptible to this. cleaningfthefcabinetf clean this system with a sof cloth slightly moistened with a mild detergent solution. do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. tofpreventfaftapeffromfbeingf accidentallyfrecordedfoverf break of the cassettes overwrite protection tab from side a or b as illustrated. break of the cassette tab to later reuse the tape for recording, cover the broken tab with adhesive tape. aboutfaftapeflongerfthanf90fminutesf fe use of the tape with more than 90 minutes of play time is not recommended except for long, continuous recording or playback. cleaningftheftapefheadsf use dry- or wet-type cleaning cassette (available separately) afer every 10 hours of use, before you start an important recording, or afer playing an old tape. failure to clean the tape heads can cause degraded sound quality or an inability of the unit to record or play tapes. for details, refer to the instructions of the cleaning cassette. demagnetizingftheftapefheadsf use a demagnetizing cassette (available separately) afer every 20 to 30 hours of use. failure to demagnetize the tape heads can cause an increase in noise, a loss of high frequency sound, and an inability to completely erase tapes. for details, refer to the instructions of the demagnetizing cassette. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb additional information specifcations main unit amplifer section fe following measured at ac 230 v, 50/60 hz (russian model) fe following measured at ac 127, 220, 240 v, 50/60 hz (saudi arabian model) fe following measured at ac 120, 220, 240 v, 50/60 hz (other models) mhc-gzr9d power output (rated): 100 w + 100 w (6 at 1 khz, 1% thd) rms output power (reference) front speaker: 180 w + 180 w (per channel at 6 , 1 khz, 10% thd) center speaker: 60 w (6 at 1 khz, 10% thd) surround speaker: 60 w + 60 w (per channel at 6 , 1 khz, 10% thd) subwoofer: 180 w (6 at 80 hz, 10% thd) MHC-GZR8D power output (rated): 100 w + 100 w (6 at 1 khz, 1% thd) rms output power (reference) front speaker: 180 w + 180 w (per channel at 6 , 1 khz, 10% thd) center speaker: 60 w (6 at 1 khz, 10% thd) surround speaker: 60 w + 60 w (per channel at 6 , 1 khz, 10% thd) mhc-gzr7d power output (rated): 100 w + 100 w (6 at 1 khz, 1% thd) rms output power (reference): 180 w+ 180 w (per channel at 6 , 1 khz, 10% thd) inputs video/sat video in (phono jack): 1 vp-p, 75 ohms video/sat audio in l/r (phono jacks): voltage 250/450 mv, impedance 47 kilohms mic 1/mic 2 (phone jacks): sensitivity 1 mv, impedance 10 kilohms outputs video out (phono jack): max. output level 1 vp-p, unbalanced, sync negative, load impedance 75 ohms s video out (4-pin/mini-din jack): y: 1 vp-p, unbalanced, sync negative, c: 0.286 vp-p, load impedance 75 ohms component video out: y: 1 vp-p, 75 ohms p b /c b : 0.7 vp-p, 75 ohms p r /c r : 0.7 vp-p, 75 ohms dvd digital out (mhc-gzr7d only) (square optical connector jack, rear panel): wavelength 660 nm phones (stereo mini jack): accepts headphones of 8 ohms or more subwoofer out (MHC-GZR8D/ gzr7d only): voltage 1 v, impedance 1 kilohms continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb front speaker: mhc-gzr9d: use only the supplied speaker ss- gzr9d. MHC-GZR8D/gzr7d: use only the supplied speaker ss- gzr8d. surround speaker (mhc-gzr9d/ gzr8d only): use only the supplied speaker ss- rsx9d. center speaker (mhc-gzr9d/ gzr8d only): use only the supplied speaker ss- ctx9d. subwoofer (mhc-gzr9d only): use only the supplied subwoofer ss-wgv9d. usb section supported bit rate mp3 (mpeg 1 audio layer-3): 32 C 320 kbps wma: 48 C 192 kbps aac: 48 C 320 kbps sampling frequencies mp3 (mpeg 1 audio layer-3): 32/44.1/48 khz wma: 44.1 khz aac: 44.1 khz (usb) port: maximum current: 500 ma disc player section system: compact disc and digital audio and video system laser diode properties emission duration: continuous laser output*: less than 44.6w * fis output is the value measurement at a distance of 200mm from the objective lens surface on the optical pick-up block with 7mm aperture. frequency response dvd (pcm 48 khz): 2 hz 22 khz (1 db) cd: 2 hz 20 khz (0.5 db) video color system format russian model: pal latin american model: ntsc other models: ntsc and pal tape deck section recording system: 4- track 2- channel, stereo tuner section fm stereo, fm/am superheterodyne tuner fm tuner section tuning range: 87.5 108.0 mhz (50 khz step) antenna: fm lead antenna antenna terminals: 75 ? unbalanced intermediate frequency: 10.7 mhz www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-12(1) 137 gb additional information am tuner section tuning range: russian and saudi arabian models: 531 1,602 khz (9 khz step) latin american model: 530 1,710 khz (with 10 khz tuning interval) 531 1,710 khz (with 9 khz tuning interval) australian model: 531 1,710 khz (with 9 khz tuning interval) 530 1,710 khz (with 10 khz tuning interval) other models: 531 1,602 khz (with 9 khz tuning interval) 530 1,610 khz (with 10 khz tuning interval) antenna: am loop antenna antenna terminals: external antenna terminal intermediate frequency: 450 khz speaker front speaker (ss-gzr9d) for mhc- gzr9d front speaker (ss-gzr8d) for mhc- gzr8d/gzr7d speaker system: 3-way, bass refex, magnetically shielded speaker unit subwoofer: 130 mm, cone type woofer: 130 mm, cone type tweeter: 40 mm, horn type rated impedance: 6 ohms dimensions (w/h/d): approx. 250 350 255 mm mass: approx. 4.6 kg surround speaker (ss-rsx9d) for mhc-gzr9d/gzr8d speaker system: 1-way, bass refex speaker unit full-range: 80 mm, cone type rated impedance: 6 ohms dimensions (w/h/d): approx. 174 96 113 mm mass: approx. 640 g center speaker (ss-ctx9d) for mhc- gzr9d/gzr8d speaker system: 1-way, bass refex, magnetically shielded speaker unit full-range: 80 mm, cone type rated impedance: 6 ohms dimensions (w/h/d): approx. 230 97 117 mm mass: approx. 920 g subwoofer (ss-wgv9d) for mhc- gzr9d speaker system: subwoofer system, bass refex, magnetically shielded speaker unit subwoofer: 200 mm, cone type rated impedance: 6 ohms dimensions (w/h/d): approx. 270 325 340 mm mass: approx. 6.2 kg continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-12(1) 138 gb general power requirements russian model: ac 230 v, 50/60 hz australian model: ac 230 C 240 v, 50/60 hz tai model: ac 220 v, 50/60 hz saudi arabian model: ac 120 127, 220, 230 240 v, 50/60 hz, adjustable with voltage selector other models: ac 120, 220, 230 240 v, 50/60 hz, adjustable with voltage selector power consumption mhc-gzr9d: 270 w (russian model: 0.5 w in power saving mode) MHC-GZR8D: 240 w mhc-gzr7d: 170 w (russian model: 0.5 w in power saving mode) dimensions (w/h/d) (excl. speakers) mhc-gzr9d/gzr8d: approx. 280 325 415 mm mhc-gzr7d: approx. 280 325 382 mm mass (excl. speakers) mhc-gzr9d: approx. 12 kg MHC-GZR8D: approx. 11.5 kg mhc-gzr7d: approx. 10.5 kg supplied accessories: remote commander (1) am loop antenna (1) fm lead antenna (1) video cord (1) speaker pads (mhc-gzr9d (24), MHC-GZR8D (20), mhc-gzr7d (8)) speaker cords (3) (mhc-gzr9d/ gzr8d only) karaoke dvd disc (2) (russian model only) microphone (1) (russian and philippine models only) r6 (size aa) batteries (2) design and specifcations are subject to change without notice. standby power consumption: 0.5 w halogenated fame retardants are not used in the printed wiring boards. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 19 gb additional information guide to the control menu display use the control menu to select a function and to view related information. press display repeatedly to turn on, turn of or change the control menu display as follows: control menu display 1 control menu display 2 (appears for certain discs and usb devices only) control menu display of control menu display 1 control menu display fe control menu display 1 and 2 will show diferent items depending on the disc type. example: control menu display 1 when playing a dvd video currently playing title number currently playing chapter number total number of titles total number of chapters playback status ( playback, pause, stop, etc.) type of disc being played back elapsed playing time current setting options controlfmenuf items selected item function name of selected control menu item operation message to turn of the control menu press display repeatedly until the control menu disappears from the tv screen. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 10 gb list of control menu items item itemfname,ffunction,frelevantfdiscftypef [title]f(pagef 0)/[ scene]/[track]f(pagef 0) selects the title, scene, or track to be played back. [chapter]/[ index]f(pagef0) selects the chapter or index to be played back. [ track] 1) f(pagef0) selects the track to be played back. [ original/playflist]f(pagef 9) selects the playback sequence either to the originally recorded sequence or to the playlist created on the disc. [ time] 1) f(pagef1) checks the elapsed playing time and the remaining time. inputs the time code for picture and music searching. [ program]f(pagef ) plays back the tracks in the order you want. [ shuffle] 1) f(pagef,f91) plays back the tracks in random order. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 11 gb additional information item itemfname,ffunction,frelevantfdiscftypef [ repeat] 1) f(pagef7,f9) plays back all discs repeatedly, the entire disc (all titles/all tracks/all folders) repeatedly or one title/chapter/track/folder/fle repeatedly. [ a/vfsync]f(pagef 9) you can adjust the delay between the picture and sound. [ setup] 1) f(pagef,f) quick use quick setup to choose the language of the on-screen display and the aspect ratio of the tv. custom in addition to the quick setup setting, you can adjust other settings. [ folder] 1) f(pagef0) selects the folder to be played back. [ file] 1) f(pagef0) selects the jpeg image fle or divx video fle to be played back. [ date] 1)f (pagef11) displays the date when the picture was taken by a digital camera. [ interval] 1) f(pagef,f90) specifes the duration for which the slides are displayed on the tv screen. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb item itemfname,ffunction,frelevantfdiscftypef [ effect] 1) f(pagef7,f91) selects the transition efects to be used for changing slides during a slide show. [ modef(music,fimage)] 1) f(pagef,f87,f88) for data cd/dvd, selects the data type: mp3 audio track (music), jpeg image fle (image) or both (auto) to be played back. for usb device, selects the data type: audio track (music) or jpeg image fle (image) to be played back. [ usbfrecording]f(pagef80) transfers tracks on an audio cd or data cd/dvd to an usb device. [ karaokefmode] 1) f(pagef98) sets karaoke mode to on or of. [ scorefmode] 1)) f(pagef10) calculates your vocal score by comparing your voice with the music source. [ vocalfselect] ) f(pagef10) selects the guide vocal recorded on the dolby digital karaoke format disc (dvd video only). selects the vocal type recorded on the disc (video cd, audio cd only). turns of the vocal. 1) fese functions are the same when using an usb device. however, some menu items may not be available. 2) fis function is only available during karaoke mode. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb additional information language code list fe language spellings conform to the iso 639:1988 (e/f) standard. code language code language code language code language 1027 afar 1186 scots gaelic 1350 malayalam 1513 siswati 1028 abkhazian 1194 galician 1352 mongolian 1514 sesotho 1032 afrikaans 1196 guarani 1353 moldavian 1515 sundanese 1039 amharic 1203 gujarati 1356 marathi 1516 swedish 1044 arabic 1209 hausa 1357 malay 1517 swahili 1045 assamese 1217 hindi 1358 maltese 1521 tamil 1051 aymara 1226 croatian 1363 burmese 1525 telugu 1052 azerbaijani 1229 hungarian 1365 nauru 1527 tajik 1053 bashkir 1233 armenian 1369 nepali 1528 fai 1057 byelorussian 1235 interlingua 1376 dutch 1529 tigrinya 1059 bulgarian 1239 interlingue 1379 norwegian 1531 turkmen 1060 bihari 1245 inupiak 1393 occitan 1532 tagalog 1061 bislama 1248 indonesian 1403 (afan) oromo 1534 setswana 1066 bengali; bangla 1253 icelandic 1408 oriya 1535 tonga 1067 tibetan 1254 italian 1417 punjabi 1538 turkish 1070 breton 1257 hebrew 1428 polish 1539 tsonga 1079 catalan 1261 japanese 1435 pashto; pushto 1540 tatar 1093 corsican 1269 yiddish 1436 portuguese 1543 twi 1097 czech 1283 javanese 1463 quechua 1557 ukrainian 1103 welsh 1287 georgian 1481 rhaeto-romance 1564 urdu 1105 danish 1297 kazakh 1482 kirundi 1572 uzbek 1109 german 1298 greenlandic 1483 romanian 1581 vietnamese 1130 bhutani 1299 cambodian 1489 russian 1587 volapk 1142 greek 1300 kannada 1491 kinyarwanda 1613 wolof 1144 english 1301 korean 1495 sanskrit 1632 xhosa 1145 esperanto 1305 kashmiri 1498 sindhi 1665 yoruba 1149 spanish 1307 kurdish 1501 sangho 1684 chinese 1150 estonian 1311 kirghiz 1502 serbo-croatian 1697 zulu 1151 basque 1313 latin 1503 singhalese 1703 not specifed 1157 persian 1326 lingala 1505 slovak 1165 finnish 1327 laothian 1506 slovenian 1166 fiji 1332 lithuanian 1507 samoan 1171 faroese 1334 latvian; lettish 1508 shona 1174 french 1345 malagasy 1509 somali 1181 frisian 1347 maori 1511 albanian 1183 irish 1349 macedonian 1512 serbian continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb parental control area code list code area code area code area code area 2044 argentina 2165 finland 2362 mexico 2149 spain 2047 australia 2174 france 2376 netherlands 2499 sweden 2046 austria 2109 germany 2390 new zealand 2086 switzerland 2057 belgium 2248 india 2379 norway 2528 failand 2070 brazil 2238 indonesia 2427 pakistan 2184 united kingdom 2079 canada 2254 italy 2424 philippines 2090 chile 2276 japan 2436 portugal 2092 china 2304 korea 2489 russia 2115 denmark 2363 malaysia 2501 singapore www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb additional information glossary auto pause an automatic pause according to the signal encoded on the disc while playing a video cd. if the cd/dvd player does not resume play for a long time, press (or press ? on the unit) to resume play manually. chapter subdivision of a title on a dvd video. a title is composed of several chapters. digital cinema sound (dcs) fis is the generic name of the surround sound produced by digital signal processing technology developed by sony. unlike previous surround sound felds mainly directed at the reproduction of music, digital cinema sound is designed specifcally for the enjoyment of movies. divx ? digital video technology created by divx, inc. videos encoded with divx technology are among the highest quality with a relatively small fle size. dolby digital fis movie theater sound format is more advanced than dolby surround pro logic. in this format, the surround speakers output stereo sound with an expanded frequency range and a subwoofer channel for deep bass is independently provided. fis format is also called 5.1 because the subwoofer channel is counted as 0.1 channel (since it functions only when a deep bass efect is needed). all six channels in this format are recorded separately for superior channel separation. furthermore, since all the signals are processed digitally, less signal degradation occurs. dolby pro logic ii dolby pro logic ii creates fve full- bandwidth output channels from 2 channel sources. fis is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. moviefmode fe movie mode is for use with stereo television shows and all the programs encoded in dolby surround. fe result is enhanced sound feld directionality that approaches the quality of discrete 5.1-channel sound. musicfmode fe music mode is for use with any stereo music recordings, and provides a wide and deep sound space. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 1 gb dolby surround pro logic as one method of dolby surround, dolby surround pro logic produces four channels from 2channel sound. compared with the former dolby surround system, dolby surround pro logic reproduces lef-to-right panning more naturally and localizes sounds more precisely. to take full advantage of dolby surround pro logic, you should have one pair of surround speakers and a center speaker. fe surround speakers output monaural sound. dts digital audio compression technology developed by dts, inc. fis technology conforms to 5.1-channel surround. fe surround channel is stereo and there is discrete subwoofer channel in this format. dts provides the same 5.1 discrete channels of high quality digital audio. fe good channel separation is realized because the all channel data is recorded discrete and processed in digital. dvd video a disc that contains up to 8 hours of moving pictures even though its diameter is the same as an audio cd. fe data capacity of a single-layer and single- sided dvd video, at 4.7 gb (giga byte), is 7 times that of an audio cd. furthermore, the data capacity of a dual- layer and single-sided dvd video is 8.5 gb, a single-layer and double-sided dvd video 9.4 gb, and a dual-layer and double-sided dvd video 17 gb. fe picture data uses the mpeg 2 format, one of the worldwide standards for digital compression technology. fe picture data is compressed to about 1/40 of its original size. fe dvd video also uses variable rate coding technology that changes the data to be allocated according to the status of the picture. fe audio data is recorded in dolby digital as well as in pcm, allowing you to enjoy more realistic audio presence. furthermore, various advanced functions such as the multi-angle, multilingual, and parental control functions are provided with the dvd video. dvd-rw a dvd-rw is a recordable and rewritable disc that is the same size as a dvd video. fe dvd-rw has two diferent modes: vr mode and video mode. dvd-rws created in video mode have the same format as a dvd video, while discs created in vr (video recording) mode allow the contents to be programmed or edited. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 17 gb additional information dvd+rw a dvd+rw (plus rw) is a recordable and rewritable disc. dvd+rws use a recording format that is comparable to the dvd video format. file a jpeg image fle or divx video fle recorded on a data cd, data dvd or usb device. (file is an exclusive defnition for this system.) a single fle consists of a single image. film based software, video based software dvd videos can be classifed as film based or video based sofware. film based dvd videos contain the same images (24 frames per second) that are shown at movie theaters. video based dvd videos, such as television dramas or sitcoms, displays images at 30 frames (or 60 felds) per second. folder section of a music or picture piece on a data cd, data dvd or usb device containing mp3 audio tracks, jpeg image fles, divx video fles. interlace format (interlaced scanning) fe interlace format is the ntsc standard method for displaying tv images at 30 frames per second. each frame is scanned twice-alternately between the even numbered scanning lines and then odd numbered scanning lines, at 60 times per second. menu playback playback using the menu screens recorded on video cds with pbc functions. you can enjoy simple interactive sofware using the menu playback function. multi-angle function various angles, or viewpoints of the video camera, for a scene are recorded on some dvd videos. multilingual function several languages for the sound or subtitles in a picture are recorded on some dvd videos. multi session fis is a recording method that enables adding of data using the track-at-once method. conventional cds begin at a cd control area called the lead-in and end at an area called lead-out. a multi session disc is a disc having multiple sessions, with each segment from lead-in to lead-out regarded as a single session. continued www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 18 gb parental control a function of the dvd video to limit playback of the disc by the age of the users according to the limitation level in each country. fe limitation varies from disc to disc; when it is activated, playback is completely prohibited, violent scenes are skipped or replaced with other scenes and so on. playback control (pbc) signals encoded on video cds (version 2.0) to control playback. by using menu screens recorded on video cds with pbc functions, you can enjoy playing simple interactive programs, programs with search functions, and so on. progressive format (sequential scanning) in contrast to the interlace format, the progressive format can reproduce 50 60 frames per second by reproducing all scanning lines (525 lines for the ntsc system, 625 lines for pal system). fe overall picture quality increases and still images, text and horizontal lines appear sharper. fis format is compatible with the 525 or 625 progressive format. region code fis system is used to protect copyrights. a region code is allocated on each dvd system or dvd video according to the sales region. each region code is shown on the unit as well as on the disc packaging. fe system can play back the discs that match its region code. fe system can also play back discs with the mark. even when the region code is not shown on the dvd video, the region limit may still be activated. scene on a video cd with pbc functions, the menu screens, moving pictures and still pictures are divided into sections called scenes. title fe longest section of a picture or a music piece on a dvd video; a movie, etc., for a picture piece on video sofware, or the entire album in audio sofware. track section of a picture or a music piece on a video cd, cd, or mp3. a folder is composed of several tracks (mp3 only). www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 19 gb additional information video cd a compact disc that contains moving pictures. fe picture data uses the mpeg 1 format, one of the worldwide standards for digital compression technology. fe picture data is compressed to about 1/140 of its original size. consequently, a 12 cm video cd can contain up to 74 minutes of moving pictures. video cds also contain compact audio data. sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed. video cds can hold 6 times the audio information of conventional audio cds. fere are 2 versions of video cds. version 1.1: you can play back only moving pictures and sounds. version 2.0: you can play back high- resolution still pictures and enjoy pbc functions. fis system conforms to both versions. www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) 10 gb index numerics 16:9 6 5 4:3 letter box 6 5 4:3 pan scan 6 6 5.1 channel surround 11 2 , 11 5 a a/v sync 5 9 , 14 1 aac 8 5 angle 4 0 audio 6 5 audio drc 6 7 audio setup 6 7 auto pause 14 5 b background 6 8 batteries 2 5 black level 6 6 black level (component out) 6 6 c chapter 4 7 , 14 0 chapter 3 9 , 14 5 cold reset 12 9 color system (video cd) 6 6 component video out 2 8 , 11 4 controlling the tv 2 9 control menu display 13 9 custom 2 8 , 6 0 , 6 3 d data cd 7 data dvd 8 date 14 1 demonstration 10 7 digital cinema sound (dcs) 14 5 digital media port 11 4 divx 5 7 , 14 5 dolby digital 14 5 dolby pro logic ii 14 5 movie mode 14 5 music mode 14 5 dolby surround pro logic 14 6 dts 14 6 dvd 7 , 8 dvd+rw 7 , 14 7 dvd-rw 7 , 14 6 dvd video 14 6 e effect 5 7 , 9 1 , 14 2 f fast forward 3 9 fast reverse 3 9 file 4 8 , 14 1 file 14 7 film based sofware 14 7 folder 4 8 , 9 2 , 14 1 folder 14 7 freeze frame 3 9 front panel display 1 9 i index 5 0 , 14 0 instant advance 3 9 instant replay 3 9 interlace format 14 7 interval 5 6 , 9 0 , 14 1 j jpeg 5 2 , 5 3 , 5 5 , 8 8 k karaoke 9 8 echo 9 9 karaoke mode 9 8 , 14 2 karaoke pon 10 1 key control 10 1 score mode 10 3 , 14 2 vocal select 10 2 , 14 2 l language code list 14 3 language setup 3 4 , 6 4 m manual recording 7 5 menu 6 5 menu playback 14 7 microphones 9 8 microphone volume 9 9 mode (music, image) 5 5 , 14 2 mp3 7 , 8 5 multi-angle 4 0 , 14 7 multi-disc resume 4 4 , 6 8 multilingual 14 7 multi session disc 1 0 , 14 7 www.datasheet.co.kr datasheet pdf - http://www..net/
mhc-gzr9d/gzr8d/gzr7d.gb.3-870-909-11(1) additional information 11 gb o original 4 9 , 14 0 osd 6 5 other component hookup 11 3 p parental control 6 0 parental control 14 8 pause mode 6 6 pbc playback 4 2 playback control (pbc) 14 8 play list 4 9 , 14 0 program 4 4 , 14 0 program play 4 4 progressive (component out) 2 8 , 6 6 progressive format 14 8 q quick setup display 3 4 r radio 7 1 radio stations 7 1 rear panel 11 3 rec 1 7 9 recording 7 5 , 8 3 region code 14 8 remote 1 3 repeat 4 7 , 9 2 , 14 1 repeat play 4 7 , 9 2 reset 13 0 resume play 4 3 s scene 14 0 scene 14 8 screen saver 6 7 searching 4 9 setup 14 1 setup menu 6 3 shuffle 4 6 , 9 1 , 14 0 shufe play 4 6 , 9 1 sleep timer 10 5 slide show 5 3 , 8 8 slow-motion play 3 9 sound field 9 5 speaker setup 6 8 subtitle 6 5 s video 11 4 synchronized transfer 7 9 synchro recording 7 5 system setup 6 7 t test tone 7 0 theatre sync 3 6 time 5 1 , 14 0 timer 10 5 title 4 7 , 14 0 title 4 9 , 14 8 track 4 6 , 9 2 , 14 0 track 7 , 8 track selection 6 7 transferring 7 8 troubleshooting 11 8 tv hookup 2 6 tv type 6 5 u unit 1 2 usable discs 7 usb 7 8 usb device 7 8 usb recording 8 0 , 14 2 v video cd 7 , 14 9 video setup 3 4 , 6 5 w wma 8 5 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of MHC-GZR8D

	To Download MHC-GZR8D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .